搜索资源列表
MC9S12HY步进电机官方例程
- 飞思卡尔步进电机运行控制例程.基于MC9S12HY64的.
PWM_motor.PWM控制步进电机的设计
- PWM控制步进电机的设计，控制其正反转等，涵盖c语言设计，包括了proteus仿真原理图，可以直观显示！供大家参考！,PWM control of stepper motor design, control of its positive inversion, etc., covering the c language design, including proteus simulation schematic, you can visually show! For your reference
单片机对四相步进电机的控制
- 本程序为单片机对四相步进电机的控制，使用L297，能够通过键盘设置电机的转动角度，精度为1度，文件夹里附有源代码和仿真电路图,This procedure for the single-chip for four-phase stepper motor control, use L297, set up through the keyboard of the rotating electrical point of view, an accuracy of 1 degree, with a fo
S3C44B0PWM
- S3C44BX上用PWM实现步进电机的控制。所用步进电机是4相八拍-S3C44BX on the realization of stepper motor with PWM control. The 4-phase stepper motor is shot eight
stepmoter
- 基于stc 8052单片机 的步进电机的控制 包扩加速 减速 显示-very good
bujin
- 步进电机驱动程序：练习对步进电机的控制及代码编写-Stepper motor driver: practice on the stepper motor control and coding
zoubeifuwei
- 这个事自己做的第一个单片机程序，主要实现对步进电机的控制-Do this thing the first single-chip process, the main control of the stepper motor
StepMotor@l298n
- 用L298N实现两相四线步进电机的控制，程序在51单片机上调试通过，控制口P1.0~P1.3-With the realization of two-phase four-wire L298N stepper motor control, program debugging through the MCU 51 to control the port P1.0 ~ P1.3
1768对于步进电机的控制源码
- 基于1768的用脉冲对两相步进电机的控制，个人编写，希望能够给有需要用到的人。
步进电机控制,LCD显示
- 利用C51对步进电机进行控制，可以加，减速，正转反转，LCD显示步进电机实时状态，当速度达到一定值时，警报器报警。(Using C51 to control the stepper motor, you can add, slow, positive reverse, LCD shows the real-time status of stepper motor, when the speed reaches a certain value, alarm alarm.)
步进电机、伺服电机控制原理
- 伺服电机和步进电机的控制过程和控制原理，控制系统(Programming motion control system based on vc++, MFC)
步进电机 - zzb
- 一个对步进电机的控制程序，可以对步进电机进行控制(A stepper motor control program, you can control the stepper motor)
步进电机
- 控制步进电机的程序，用51单片机，比较简单易懂有注释(Stepper motor control procedures, with 51 single-chip, relatively simple, easy to understand, notes)
Labview_并口控制步进电机
- 步进电机联机控制，将通讯电缆连接到计算机的COM1与控制器的RS-232口，再打开控制器的电源开关并设置好联机，最后打开上位机界面，(The control resource, data type, data analysis and processing library function are used to realize automatic measurement of control system. It mainly collects light intensity signals
YSF1_HAL_MOTOR-016. 四轴步进电机导轨控制
- 控制四轴步进电机的加减速运动，到目标位置即停止。(Control the acceleration and deceleration of four - axis stepper motor and stop at the target position)
YSF1_HAL_MOTOR-019. 步进电机位置环控制
- 利用pid反馈控制步进电机的位置，即给定位置慢慢接近即刻停止。(The position of the stepper motor is controlled by PID feedback, that is, the position is slowly close to the immediate stop.)
YSF1_HAL_MOTOR-017. 步进电机编码器读取
- 读取编码器的数值，编码器的数值决定步进电机的位置。(The value of the encoder is read, and the encoder's value determines the position of the stepper motor.)
步进电机参考程序 带注释
- 适合改多轴步进电机控制。使用定时器中断与外部中断实现。使用步进电机驱动器。(Suitable for multi-axis stepper motor control. Using timer interrupts and external interrupts. Use a stepper motor driver.)
步进电机Linux驱动
- 用于arm控制步进电机的驱动，因为步进电机用到了I/O端口，而在ARM9中操作端口要用虚拟地址而非实际的物理地址。(Drive for arm control step motor)
步进电机
- 用单片机实现对步进电机的控制，启动，暂停，加速，减速，速度等级显示！(MCU is used to control stepping motor, start, suspend, accelerate, decelerate and speed grade display.)