搜索资源列表
dsp1.1
- LMS算法，从宽带信号中提取单频信号的算法，方法简单易行-LMS algorithm, broadband signal from the single-frequency signal extraction algorithm is simple
kuopin-commulication
- 扩展频谱通信系统是指待传输信息的频谱用某个特定的扩频函数扩展后成为宽频带信号，送入信道中传输，再利用一定手段将其压缩，从而获取传输信息的通信系统。 在传输同样信息时所需的射频带宽，远比我们已熟知的各种调制方式要求的带宽要宽得多。扩频带宽至少是信息带宽的几十至 几万倍。-spread spectrum communication systems refer to the transmission of information with a particular spectrum of spre
csm_liu.rar
- 典型宽带信号处理方法，频率聚焦技术csm，宽带信号频率范围100-3100hz，对远场两个宽带信号源进行定位。,A typical broadband signal processing methods, frequency Focusing csm, broadband signal frequency range 100-3100hz, two pairs of far-field wideband signal source location.
ESPRIT
- ESPRIT 相关资料，宽带信号 虚拟旋转不变性 虚拟阵列 不需要特征值分解的ESPRIT-ESPRIT information, broadband signal does not need virtual virtual array rotation invariance of the ESPRIT eigenvalue decomposition
broadsig_gen
- 宽带信号产生程序，高斯噪声通过滤波器产生，希望对大家有帮助。-this is a wideband signal generation program. Geting broadband signal by make aussian noise go through the filter.
Advances_in_Direction_of_Arrival_Estimation
- 本书主要介绍了波束形成算法，非均匀线性天线阵列用于高斯检测估计，以及宽带信号的DOA估计，相干宽带DOA估计等-This book introduces the beamforming algorithm, non-uniform linear antenna array for the Gaussian detection estimate, and broadband signal DOA estimation, coherent broadband DOA estimation
twocircle
- 现今阵列应用中，宽带信号的处理越来越多。由同心圆阵组成的多圈圆形阵列在宽带信号处理上有更强的优势。和单圈均匀圆阵相比，同心多圈圆阵的嵌套设计阵列工作频率范围更宽，同时，灵活性增强。 -Nowadays array applications, the broadband signals in many more and more treatment. By the array composed of many concentric circular ring array of broadban
NewalgorithmrequiringnopreprocessingforwidebandDOA
- 这是一篇讲述宽带信号DOA估计时一种不需要预估角度的聚焦矩阵的估计算法-This is a broadband signal on the DOA estimates do not need to forecast a focal point of the estimation algorithm matrix
klm_transducer_model
- KLM [Krimholtz, Leedom, and Matthaei, 1970] model of broadband transducer operation into an acoustic medium. Single active layer.
zishiyin
- 1.设计自适应信号分离器，用以从白噪声中提取周期信号。其中选取正弦信号s=sin(2*pi*t/10)为周期信号，宽带噪声信号为高斯白噪声，设置参考通道延迟为50。 2.宽带信号中的窄带干扰抑制实际上是自适应信号分离的一种应用，借助自适应信号分离器可以方便的实现窄带干扰的对消。-1. Design of adaptive signal separator, used to extract from the white noise periodic signal. The extraction
plx_new
- 该文档时一个宽带信号处理的源代码，被验证是成功的，可以供学习练手-The document, a broadband signal processing, source code, to be verified to be successful, you can study and practice for hand
QI045_Matlab_X_L
- 扩频通信，从电磁波利用来看，与一般现有的常规通信方式完全不同。扩频通信利用伪随机编码把信息数据（窄带信号）的频谱进行扩展，形成宽带的低功率谱密度信号发射，使用不同的伪随机序列编码，不同通信用户可在同一频段、同一时间工作，互不影响或干扰极小地进行通信。-Spectrum, from the electromagnetic waves used term, and the general existing conventional means of communication is entirel
zishiyingpuxianzengqiangqi
- 将正弦波与宽带噪声分离开来，并提取正弦波信号-The sine wave and separated from the broadband noise, and extract the sine wave signal
tops
- 一篇关于TOPS的有用宽带信号测向方法，一篇关于TOPS的有用宽带信号测向方法-TOPS useful article on the method of measurement of broadband signals, a broadband signal on the TOPS useful method of finding
r-li-2008-thesis.pdf.tar
- As a multi-carrier modulation scheme, Orthogonal Frequency Division Multiplexing (OFDM) technique can achieve high data rate in frequency-selective fading channels by splitting a broadband signal into a number of narrowband signals over a number
Te
- 实现宽带信号放大，由AD603级联组成增益放大器，实现增益 -20～60dB 范围内可按5dB步进调节或连续可调，且在0～9MHz通频带内增益起伏在1dB以下 互补三极管射级跟随高功率输出在50 负载上最大输出电压有效值Vo≥10V,波形无明显失真 功放输出信号经有效值检波后，通过10位A/D转换芯片TLC1549，将模拟电压的有效值转换成数字信号，并送微控制器实现增益预置与显示。-Broadband signal is amplified by the AD603 gain am
wide-band-signal-DOA-mode-space
- 均匀圆阵模式空间下估计信号源方向，信号源为宽带-Under the uniform circular array pattern space is estimated source direction, the signal source for broadband
broadband-signal-line-antenna
- 通过设定信号和阵源参数，以及阵列相位误差、阵列幅度误差，对阵列输出相关矩阵进行特征分解，生成宽带信号-By setting the parameter of the signal and the array source, as well as the the array phase error, the array amplitude error characteristic decomposition of the correlation matrix of the array output
Broadband-signal
- 宽大信号产生仿真程序，大家可以下载下来-Broadband signal
wideband
- 宽带波束形成程序，用于宽带信号处理及波达方向估计(broadband signal processing)