搜索资源列表
channel
- ofdm信道特性 Channel transmission simulator Channel transmission simulator ％ ％ inputs: ％ sig2 - noise variance ％ Mt - number of Tx antennas ％ Mr - number of Rx antennas ％ x - vector of complex input symbols (for MIMO, this is a matrix, wh
OFDM_Rayleigh
- 3 MATLAB functions for simulation of OFDM signal in Rayleigh fading channel. Including models for OFDM frame generating, cyclic prefix, pramble, as well as model for Rayleigh channel, QAM modulation function and a example of test process.
ofdm
- 研究OFDM系统抗干扰技术，采用Matlab仿真环境，评价采用循环前缀(CP)和均衡技术的OFDM系统在多径环境和衰落信道条件下的误比特率、误帧率等性能指标。-Study on anti-jamming technology OFDM system using Matlab simulation environment to evaluate the use of cyclic prefix (CP) technology and balanced OFDM system in multipat
cox_algorithm
- in his name this code is simulation of cox algorithm for ofdm synchronization in WIMAX down link systems. it send 2 frame via awgn channel and uses from correlation to detect the beginning of frame. .-in his name this code is simulat
OFDM_in_Multipath_Matlab_model
- OFDM in Multipath Model Matlab: ofdmVersion4forCForward: It is for forward channel i.e. transmission of data. ofdmVersion4forCBackward: This is for feedback transmission for sending modulation state for next frame transmission.
aperfectOFDMsimulationMATLAB
- 接收端采用的算法和程序流程与发送端发送的OFDM符号的帧结构有关系。具体的帧结构，以及定时估计，频偏估计，剩余误差跟踪的算法可参考算法说明文档。-Receiver used algorithms and program flow with the sender sends the frame structure of OFDM symbols are. Concrete frame structure and timing estimates, frequency offset estimati
OFDM
- 该模型实现了一个通用的OFDM TX和RX，这是不依赖于任何特定的行业标准。该模型的目标是开发和研究不断（不是“突发”）载波同步和定时跟踪方案。该技术纳入然后可以扩展和修改，以标准的具体通讯套件。该模型采用了“收购”技术，它利用了循环前缀相关属性，以赶在试图完成罚款跟踪算法一帧的边界粗略的估计。该模型实现了一个16点64循环前缀的OFDM载波波形。在OFDM符号有16个飞行员，3后卫音（0，带边幅），并使用45 QAM的剩余数据流4。 这包括最新型的衰落信道，误码率计算，并
OFDM-MATLAB
- 接收端采用的算法和程序流程与发送端发送的OFDM符号的帧结构有关系-Receiver using the algorithm and program flow with the sender sending the OFDM symbol of the frame structure of relations
Frame_Detection
- ofdm系统中的完整帧同步模块，基于verilog实现。-ofdm system full frame synchronization module, based on verilog implementation.
OFDM-frame-synchronization
- 基于能量差分的ofdm帧同步算法matlab程序，可以运行-OFDM frame synchronization based on energy difference of the received preamble，can run
ofdmace
- 本程序包含了用于OFDM中降低PAPR的ACE算法的仿真，所使用的ACE算法包括常规ACE、改进ACE、ACE-SGP以及帧交织ACE。是我毕业设计的所做的内容。-This program includes the reduction for OFDM PAPR of the ACE algorithm in the simulation, using the ACE algorithm including conventional ACE, improvement of ACE, ACE-SG
perfect-OFDM-MATLAB(
- 一个非常完整的ofdm程序。接收端采用的算法和程序流程与发送端发送的OFDM符号的帧结构有关系。包括具体的帧结构，以及定时估计，频偏估计，剩余误差跟踪的算法-Ofdm a very complete program. Receiver using the algorithm and program flow with the sender sends the frame structure of OFDM symbols are related. Including specific frame
Frame-synchronizatifor-OFDM
- OFDM系统中的帧同步算法和理论分析，很好的学习材料-Frame synchronization in OFDM system algorithms and theoretical analysis, a very good learning materials
MIMO-OFDM-Systems-Based-on-Preamble-
- MIMO OFDM 技术将成为第4 代移动通信系统的关键技术, 因MIMO OFDM 对时间和频率偏移非常敏感, 因此MIMO OFDM 同步显得尤为重要。提出了一种新的MIMO OFDM 定时同步和频偏同步技术。以GCL 序列为基础设 计了一个新的符合MIMO OFDM 同步技术的导频序列, 通过对该导频序列进行2 次相关得到频率估计, 并将所得频率 运用到定时同步中, 得到更为准确的时间估计
impulsive-noise-simulation-PLC
- 电力线信道噪声模型matlab仿真，在输入端把脉冲噪声模型放入电力线OFDM通信系统，输出端用特定算法解码。-The algorithm estimates the impulsive noise in powerline communication, and subtract out an estimate of the impulsive noise in the current OFDM frame.
Continuous-Synchronization-of-OFDM
- 该模型实现一个不依赖于任何特定的行业标准通用的连续同步OFDMOFDM模型TX和RX。这个模型的目的是开发和探索出一条连续的（而不是“突发”）的载波和定时同步跟踪计划。然后使用该技术可以扩展和修改特定通信标准。-This model implements a generic OFDM TX and RX, which is not tied to any particular industry standard. The objective of this model is to develop
802.11a-OFDM-MATLAB
- IEEE802.11a系统级仿真完整程序，包含发送端，接收端以及信道建模等-IEEE802.11a complete system-level simulation, including the sending end, the receiver, channel modeling, can be used to run a bit error rate, frame error rate, etc.
Frame_Detection
- OFDM系统的帧检测模块，根据802.11a标准，利用前导的相关性进行的设计，综合仿真及在线调试已通过。-Ofdm frame detection module is very important and verilog difficult to realize in OFDM system.
MIMOOFDMPrecoding
- TD-LTE下行传输采用了MIMO-OFDM的物理层构架，通过最多4个发射天线并行传输多个（最多4个）数据流，能够有效地提高峰值传输速率。LTE的物理层处理过程中，预编码是其核心功能模块，物理下行共享信道的几种主要传输模式都是通过预编码实现的。(The td-scdma LTE downlink transmission adopted MIMO - OFDM frame, the physical transmission antennas parallel transmission by u
基于MATLAB的OFDM仿真设计实验报告
- 包含有数字通信课程实验大作业报告与代码。完成的OFDM的收发包含：1.卷积编码、2.自动增益控制、3.极大似然判决、4.QPSK收发、5.帧检测等，代码在MATLAB2016b环境下编译通过(It contains the report and code of the experiment assignment for the course of digital communication. The completed OFDM transceiver includes: 1. convolut