搜索资源列表
fault.zip
- 基于PSCAD的双馈风力发电机的低电压穿越模型,PSCAD based on the doubly-fed wind turbine through the low-voltage model
DFIG.zip
- dfig风电系统仿真模型，基于pscad仿真软件,dfig wind power system simulation model, based on the simulation software pscad
pscaddfig
- 基于pscad的DFIG变速恒频双馈风力发电仿真模型，是2010年3月修改版，将直流母线电压降到800V，电机为0.9【MVA】。可以进行低电压穿越仿真。-Based pscad of DFIG VSCF doubly fed wind power generation simulation model is a modified version in March 2010, the DC bus voltage down to 800V, motor 0.9】 【MVA. Can be low
Dynamicmodelsimulationofdoubly-fedwindturbines
- 为满足在电网发生故障时风电机组需保持与电网连接并向系统不间断供电的要求,提出 了双馈风力发电机的动态模型、变流器模型、变流器保护及电网模型,以研究双馈风力发电机的暂 态特性.以1·5MW SUT-1500双馈风力发电机为原型,由一个无穷大电源等效电网模型,变流器模 型采用定子磁链的定向电流矢量控制方法,利用PSCAD软件对双馈电机的暂态特性进行仿真.仿 真结果表明,矢量控制能够实现双馈电机的有功、无功解耦,并可改善系统的低压穿越能力. -To meet the power f
SVPWM
- 风力发电PSCAD仿真用得，在正转DQ坐标下，负序变换到正序模块-PSCAD simulation used wind power in the forward DQ coordinates, the negative sequence to positive sequence module transforms
DFIG_Model_0504
- 风电仿真模型的搭建用pscad搭建的，可以用于学习交流-using pscad to simulate wind farm,it can be used by people who is engineering on this aspect
WindFarm
- PSCAD软件对风电场（包括风机）建模仿真例程-PSCAD modeling and simulation software routines for wind farms
HVDC_wind
- 基于PSCAD软件环境下，利用HVDC Light输电方式下的风力发电系统仿真模型-Based on PSCAD software environment,the mode of the wind power system simulationusing using HVDC Light transmission.
Rec_WindGen
- 基于PSCAD软件环境，实现永磁同步风力发电机的软件仿真，能够模拟各种情景下的风力发电机输出与风力关系的仿真。-PSCAD-based software environment, to achieve permanent magnet synchronous wind turbine simulation，it can simulate various scenarios of wind turbine simulation of the relationship between output
Doubly_fed_windfarm
- 双馈风力发电机的PSCAD仿真，包括发电机侧和网侧的PWM控制-Wind generator PSCAD simulation, including the generator side and network side of the PWM control
STATCOMDYN
- GIVE THE WIND FARM SCIG INDCUTION GENERATOR Farm design and attached controls given in one file of PSCAD simulations that bcould be connected to other files
der5
- GIVE THE WIND FARM SCIG INDCUTION GENERATOR Farm design and attached controls given in one file of PSCAD simulations that bcould be connected to other files
YESSs
- 双馈风力发电系统的PSCAD仿真模型。大家学习下。-Wind PSCAD power system simulation model. We learn next.
DFIG_V4_March_2010
- 基于PSCAD的双馈风力发电机并网模型，实现了最大功率跟踪和有功无功的解耦控制。-根据一年中前6个月的负荷和电价数据，预测后六个月的电价，并计算精度 允许输入拉丁字符的拼音 显示对应的拉丁字符的拼音 In PSCAD doubly fed wind generation model for maximum power point tracking and decoupling control of active and reactive.
wind-pitch-control-pscad
- 风力发电机的浆距控制PSCAD仿真模型,模型通过仿真可以看到如何调节风力机的浆距，影响其输出。-pitch angle control for wind energy generation system, PSCAD/EMTDC model
wind-turbine-pacad
- 采用pscad/emtdc电力软件实现了风力机的建模，可以用于可再生能源的研究-pacad/emtdc wind turbine model and development for power system stability research
wind-matlab
- 基于matlab的风电仿真 不是PSCAD的 好好利用吧-Matlab-based simulation of wind power is not a good use of it PSCAD
Simulation-of-wind-energy
- 在PSCAD/EMTDC软件环境下进行风力发电系统系统仿真的文件和代码。-In the PSCAD/EMTDC software environment for wind power generation system files and system simulation code.
【附带说明】双馈风力发电机PSCAD仿真
- 用于海上风电场高频暂态仿真 基于PSCAD平台 撬棒控制(For the offshore wind farm high frequency transient simulation platform based on PSCAD control lever)
IEEEPES Meeting IEEE34 Bus PSCAD Modelling
- IEEE34节点系统建模说明 目录：1. Introduction 2. System Modeling 3. Power Flow Validation 4. Wind Generator Modeling 5. Slip and Power Flow Results 6. Short-Circuit Analysis 7. Conclusions(Distribution System Analysis:Panel Session -Induction Machine Mode