搜索资源列表
VC_ethernet_win
- 网络通信程序，可以进行文件传输和图像文件显示，主要用于与嵌入式目标系统文件传输-network communication procedures, can transfer files and image files, mainly for embedded target system with file transfer
Linux下网卡驱动程序源码分析
- linux下8139网卡驱动分析,非常彻底,本人照此移植成功了嵌入式设备上的网口-8139 NIC drivers under analysis, very thorough, I do the successful transplantation of embedded devices on the LAN
TCPIP的教学代码
- 此软件是从事嵌入式的开发人员进行TCPIP学习时使用的代码，有一定的指导意义，里面包括ARP ICMP IGMP OSPF协议等网络相关的协议代码，并且里面有SIP等语音网关的相关协议的代码。-this software is embedded engaged in the development of personnel TCPIP learning to use the code, a certain guiding significance, ARP, ICMP, including in
cutebomb_blink
- blink的最新版本是1.04,它可以混合连接16位和32位代码，可连接Vc++,Borland c++生成的.obj文件，还能混合连接OMF和COFF格式的.obj文件，将微软和Borland大统一^ ^。生成的bin文件短小精悍，而且可以指定bin放在内存什么地址执行.对于嵌入式开发需要的bin可执行文件十分有用。感谢cutebomb提交。-blink of 1.04 is the latest version, which can link mixed 16 - and 32-bit co
vxworks_ppp
- 嵌入式系统VXWORKS下，网络协议ppp的实现源码-VxWorks embedded systems, network protocols ppp the realization FOSS
NET_monitor_TCLTK
- 使用Tcl/TK编写的嵌入式数控系统远程控制界面，用TCP/IP实现远程运动控制。-use of Tcl / TK prepared by the NC system embedded remote control interface using TCP / IP remote control campaign.
利用Java实现串口全双工通讯
- 一个嵌入式系统通常需要通过串口与其主控系统进行全双工通讯，譬如一个流水线控制系统需要不断的接受从主控系统发送来的查询和控制信息，并将执行结果或查询结果发送回主控系统。本文介绍了一个简单的通过串口实现全双工通讯的Java类库，该类库大大的简化了对串口进行操作的过程-an embedded system usually through its serial port control system for full-duplex communications, For example, a pipe
tcpip-uip0.9
- 这是嵌入式TCP/IP协议uip，由c语言开发而成-This is embedded TCP / IP protocol East, and was developed language c
040911linuxsdb
- 是关于协议转换的一个程序，在linux嵌入式平台下开发的。-agreement on a procedure for the change in embedded Linux platform under development.
uIP(Code)
- 工嵌入式系统中，如uc/os中，需要实现TCp/IP网络功能，就可移植uIP-for embedded systems, such as uc / os, the need to achieve TCp / IP network can be transplanted Application of ulP
ddns
- 路由器DDNS的源代码 开发平台为ECOS，嵌入式系统-hotspot router source code development platform for ECOS, embedded systems
lwip_os2
- ARM+UCOS/2的嵌入式开发资料。请大家参考。-ARM / 2 embedded development information. Please refer to.
uCIPuCOS-II
- 基于ucos2的嵌入式tcp/ip协议栈的实现，有兴趣的可以看一看。-ucos2 based embedded tcp / ip protocol stack, and it is interested can look at.
naftpapp
- 一个基于tftp的演示程序，基于ThreadX的嵌入式操作系统-a demonstration on the tftp process, based on ThreadX RTOS
networkaddress
- 介绍串口以太网的软硬设计，采用NUT/OS嵌入式操作系统-introduced Serial Ethernet hardware and software design, using NUT / OS embedded operating system
ws031202-2.1.8
- GoAhead WebServer是一个用于嵌入式开发的服务器，它体积小但功能强大，支持ASP，JAVAscr ipt，FORM，CGI等功能，被称作“针尖上的服务器”。-is an embedded development for the server, it is small in size but powerful support ASP, JAVAscr ipt, FORM, CGI and other functions, known as the "tip of the s
lwip4ucos
- 在ADS开发环境中,使用lwip和ucos的配合实现嵌入式的网络开发,其中LWIP是开放原代码的,而UCOS也是开放原代码的,在ARM板上研究这两个程序对掌握嵌入式开发要点很有帮助!-ADS in the development environment, and use lwip OUT with the Embedded Web development, LWIP which is open source code, and UCOS is open source code, ARM boar
X86update
- 用在X86芯片的嵌入式系统中的自动更新程序！-X86 chips used in the embedded system's automatic update!
GetProfile_PC
- 完整的基于XMODEM协议的嵌入式系统侧FLASH Loader程序。该程序是基于三菱的M16C/60系列MCU，由于除了启动部分外完全是用C编写-XMODEM complete agreement on the embedded system side Flash Loader procedures. The procedure is based on Mitsubishi's M16C/60 MCU series, in addition to initiating componen
Ethernet_TCP_IP_AssistantV1.0
- 该软件是一个类似串口调试助手的网口调试软件。软件实现TCP/IP下的数据发送和接收功能，可以作为单片机，嵌入式网口程序开发的调试工具-The software is similar to a serial debugging assistant net mouth debugging software. Software TCP / IP of the sending and receiving of data that can be used as a microcontroller, I E