搜索资源列表
fault.zip
- 基于PSCAD的双馈风力发电机的低电压穿越模型,PSCAD based on the doubly-fed wind turbine through the low-voltage model
pscaddfig
- 基于pscad的DFIG变速恒频双馈风力发电仿真模型，是2010年3月修改版，将直流母线电压降到800V，电机为0.9【MVA】。可以进行低电压穿越仿真。-Based pscad of DFIG VSCF doubly fed wind power generation simulation model is a modified version in March 2010, the DC bus voltage down to 800V, motor 0.9】 【MVA. Can be low
Dynamicmodelsimulationofdoubly-fedwindturbines
- 为满足在电网发生故障时风电机组需保持与电网连接并向系统不间断供电的要求,提出 了双馈风力发电机的动态模型、变流器模型、变流器保护及电网模型,以研究双馈风力发电机的暂 态特性.以1·5MW SUT-1500双馈风力发电机为原型,由一个无穷大电源等效电网模型,变流器模 型采用定子磁链的定向电流矢量控制方法,利用PSCAD软件对双馈电机的暂态特性进行仿真.仿 真结果表明,矢量控制能够实现双馈电机的有功、无功解耦,并可改善系统的低压穿越能力. -To meet the power f
fengsu
- 风力发电中的风力模型 在MATLAB中的模型 很有用哦-Wind power in the wind model in MATLAB useful model in Oh
HVDC_wind
- 基于PSCAD软件环境下，利用HVDC Light输电方式下的风力发电系统仿真模型-Based on PSCAD software environment,the mode of the wind power system simulationusing using HVDC Light transmission.
Rec_WindGen
- 基于PSCAD软件环境，实现永磁同步风力发电机的软件仿真，能够模拟各种情景下的风力发电机输出与风力关系的仿真。-PSCAD-based software environment, to achieve permanent magnet synchronous wind turbine simulation，it can simulate various scenarios of wind turbine simulation of the relationship between output
STATCOMDYN
- GIVE THE WIND FARM SCIG INDCUTION GENERATOR Farm design and attached controls given in one file of PSCAD simulations that bcould be connected to other files
Simulation-of-wind-energy
- 在PSCAD/EMTDC软件环境下进行风力发电系统系统仿真的文件和代码。-In the PSCAD/EMTDC software environment for wind power generation system files and system simulation code.
Wind-Power-PPT
- 2012年5月PSCAD/EMTDC电力仿真技术交流会的PPT，是学习风电的很好资料-May 2012 PSCAD/EMTDC power simulation technology Seminar PPT is a good learning wind power
PSCAD
- 关于双馈风力发电机的PSCAD案例，希望会对大家有所帮助-PSCAD case of doubly-fed wind turbine
IEEE34-no-wind
- Ieee 34 bus for power system BY PSCAD
wind-turbine
- 基于pscad的双馈式风机模型的建立，风力发电机实现清洁能源的利用-Doubly-fed wind turbine model based on pscad
fengji-pscad
- 用PSCAD对文献中的永磁直驱风机模型进行了仿真，并且能够可靠运行。-PSCAD for literature with permanent magnet direct drive wind turbine models for simulation, and reliable operation.
Wind_generation-PSCAD
- 适合于双馈风电研究的PSCAD仿真模型，可以进行风电系统并网分析、故障分析、保护整定-Suitable for double-fed wind power research PSCAD simulation model can be wind power systems and network analysis, fault analysis, protection setting. . .
wind-generator-in-pscad
- 各种PSCAD风机模型(当时做风机模型时候辛辛苦苦收集到的)-all kinds of wind generator in pscad(did fan model when hard to collect)
direct-drive-wind-turbine
- 基于pscad的永磁直驱风机模型，自己编写，保证能跑。控制模型为简化的，请注意。-pscad based permanent magnet direct drive wind turbine model, we have written, to ensure run. To simplify the control model, please note.
myPMSG1
- 自己建立的永磁直驱风力发电系统，采用dq解耦控制，spwm调制，机侧控制最大功率跟踪，网侧控制直流电压和无功。(The permanent magnet direct drive wind power generation system has adopted DQ decoupling control, SPWM modulation, machine side control maximum power tracking, network side control DC voltage an
myPMSG2_5
- 自己建立的永磁直驱风力发电系统，采用dq解耦控制，spwm调制，机侧控制直流电压，网侧控制最大功率跟踪和无功。(The permanent magnet direct drive wind power generation system has adopted DQ decoupling control, SPWM modulation, machine side converter control DC voltage , network side control maximum power
type4_windfarm
- Windfarm model for PSCAD
IEEEPES Meeting IEEE34 Bus PSCAD Modelling
- IEEE34节点系统建模说明 目录：1. Introduction 2. System Modeling 3. Power Flow Validation 4. Wind Generator Modeling 5. Slip and Power Flow Results 6. Short-Circuit Analysis 7. Conclusions(Distribution System Analysis:Panel Session -Induction Machine Mode