搜索资源列表
TemComTest
- 串口通信上位机界面，与下位机单片机通信，获取温度数据。-PC serial communication interface, and the next-bit single-chip machine communications, access to temperature data.
shangweijiruanjian
- vb控制无线发射模块的上位机软件，接收端包括2个温度传感器和两个湿度传感器-vb control of wireless transmission module of the PC software, the receiving end, including two temperature sensors and two humidity sensors
Multi-point_temperature__PC(CODE)
- 多点温度采集上位机程序(原程序),这是配合这是配套本人上传的“多点温度采集系统”的上位机程序，一整套的东西，通这RS232接收下位机传来的数据，显示和画走势图，还可以控制下位机，通信协议在“Multi-point_temperature _system.rar”-Multi-point temperature of PC acquisition procedures (the original program), which is in line with this is the package
TempHumSystem
- 这是一个用于工控的上位机系统，可以实时监测温度，露点，湿度。用户可以根据具体情况设定报警点，当达到报警点，系统通过邮件发送报警信息给用户。-This is a PC for industrial control of the system, can be real-time monitoring of temperature, dew point and humidity. Users can set alarms based on specific circumstances, when th
DS18B20
- 把DS18B20获取来的4字节数据每隔一段时间发送到PC,在串口调试助手上可以看到温度数据.-The DS18B20 the past four bytes of data to obtain from time to time sent to the PC, the serial port debugging aids can see the temperature data.
MCU_PC_TEMPERATURE
- 实现将单片机采集的温度值通过串口传输到上位机，此程序为上位机接收温度程序，将温度值描成曲线并显示，带有保存及打开历史记录功能。-To achieve the MCU collected temperature transferred to the host computer via serial port, this procedure for the host computer receives the temperature program, the temperature value Mi
18B20
- 单片机与PC机串口通信程序，单片机采集温度和电压通过1602显示并传到PC上显示。1602可以换屏显示三个界面，还有修改上下门限。还有报警功能。-Microcontroller serial communication with the PC program, microcontroller collection display temperature and voltage through 1602 and reached the PC display. 1602 exchange for t
PCserial
- 编写VB程序实现PC与智能仪表串口通信,自动连续读取并显示仪表温度测量值等-VB Program for the preparation of PC serial communication with the intelligent instrument
com_18b20
- 虚拟串口温度计，同串口将DS18B20温度传感器的温度信息传到通用pc机显示-Virtual serial port thermometer, temperature sensor with the serial port to the temperature information DS18B20 reached common pc Machine Show
dugj
- 上位机温度 显示调试程序-PC temperature display debugger
USART
- USART： 串口打字机（将接收到的数据原样输出） PCF8563定时，利用串口将时间传至PC 24C01读写，利用串口将结果传至PC DS18B20检测温度，利用串口将结果传至PC-USART: Serial typewriter (the received data is output) PCF8563 timing, use of the time spread PC 24C01 serial read and write, using the result
VC_Mscomm
- 该C++源码通过Mscomm,实现了PC机与智能数字温度计的串口通讯,可在PC上实时显示当前温度值和一段时间内的平均值，并可通过画图实现动态显示效果。-The C++ source code through Mscomm, realized the PC, digital thermometer and intelligent serial communication, real-time display in the PC, the current temperature value and
vc
- 基于vc ds18b20测温上位机程序 可以显示当前温度-Vc ds18b20 PC-based program
serial_port
- 上位机温度采集程序，负责波形显示，超温警报，实时数据显示，采集的数据个数和最大值。-PC temperature collection procedures, is responsible for the waveform display, super temperature alarm, real time data shows, the number of the data collected and maximum.
USBTemp
- USB的温度采集，包括上位机和驱动。使用PDIUSBD12芯片.使用的是USB自定义设备，上位机用的是VC++6.0-USB temperature acquisition, including PC and drive. Use PDIUSBD12 chip using a custom USB device, host computer using VC++6.0
uart0
- 实现ADC0采样芯片温度，通过LCD显示，并通过串口0（J13）发送到PC机,同时接收PC传回的一个字符并显示， 请使用串口调试工具调试！-ADC0 sampling chip temperature, LCD display, and display through the serial port (J13) is sent to the PC, while receiving the character of the PC returns Please use the seria
Serial-read-the-temperature-
- 一款温度采集系统的上位机程序！通过232与PC机相连！-Temperature gathering PC!
Smart-Home
- 基于物联网的智能家居系统，嵌入式系统部分与pc通过串口通讯，可实现室内温度，光线，烟雾含量监测-Intelligent home networking system based on the material, part of embedded systems with pc via serial communication, indoor temperature, light, smoke content monitoring
rs232_2
- 利用CVI实现PC与智能温度仪的串口通信-CVI to achieve PC and smart thermometer serial communication
xmt1
- 利用C++Builder实现PC与智能温度仪的串口通信-To utilize C++Builder PC with intelligent temperature meter serial communication