搜索资源列表
USB1.10000
- 单片机控制飞利蒲PDIUSBD12芯片与PC机实现USB1.1通信。-SCM control NV PDIUSBD12 and PC achieve USB 1.1 communications.
USB_2.0
- USB2.0开发例程，基于51单片机，包括pc端程序-USB2.0 development routines, based on 51 MCU, including the pc-procedures
LaserScanning
- 89S51单片机通过PDIUSBD12的USB接口芯片实现与上位机通讯的固件源码，此包为一个二维激光光束扫描系统的单片机程序，包含USB固件，一个军事项目的部分工程-89S51 PDIUSBD12 microcontroller through the USB interface chip and PC communications firmware source, the package of a two-dimensional laser beam scanning system, the
VisualC_TO_USB
- 基于VisualC_实现单片机与PC机的USB通信
HID_RECV(10.20)
- CH372 下位机程序 此程序采用USB与PC机连接实现PC机与单片机通信-CH372 lower computer program and this program uses USB connection to PC, PC, communication with the MCU
usbhidio_vc6
- 真正完整，并且编译得通的代码。用vc访问hid型usb设备，输入自己的VID和PID就能实现对hid型usb设备的读写和控制 它包含单片机固件源代码和PC端的VC源代码；虽然PUDN上有其他会员提供类似的vc代码，但我发现那些代码都存在bug，只有我这个代码是唯一完整的、可以编译通过的代码。-Truly complete, and compile a pass code. Hid type with vc visit usb device, enter their own VID and PID
usbm
- 实现单片机和PC的USB通信，并识单片机为USB鼠标 使用KEIL C编程，已经经过验证。源码包括USB通信模块， 鼠标操作模块。内有详细使用说明-Achieve the microcontroller and PC, USB communications, and knowledge to use MCU for the USB mouse KEIL C programming, has been verified. Source, including USB communication mo
51HID-keyboard
- 基于51单片机实现PC键盘功能的程序和原理图-PC keyboard functions based on 51 single-chip implementation procedures and schematics
45665975USB_2.0-3237
- USB2.0开发例程，基于51单片机，包括pc端程序。 -USB2.0 to develop routines, based on 51 single-chip, including the pc client procedures.
HT82M99E_USB_send_datas_to_PC
- USB 单片机发送数据上传到PC端。中断模式上传。适用于小批量数据。-MCU (usb type) send datas to the PC.Using inrrupt to send the datas.Special for little datas.
firmware_5app3
- USB口,带轨迹球的电脑遥控器,使用ATMEGA8单片机,-USB port, PC remote control with trackball, use ATMEGA8 MCU
CHIDPORT
- CH372 上位机程序 此程序采用USB与PC机连接实现PC机与单片机通信-CH372 lower computer program and this program uses USB connection to PC, PC, communication with the MCU
CH372EVT
- 51单片机通过CH372（内置固件模式程序）传输数据给PC机(USB is the English acronym for Universal Serial BUS, Chinese meaning is "Universal Serial Bus." It is not a new bus standard, but in the PC field of application interface technology.)
QT5
- 为了实现电润湿器件的驱动和控制，该系统设计包含驱动电路和上位机软件两部分。驱动电路使用PIC单片机通过FT245组成的USB接口模块接收上位机的控制命令，按照预定义的格式解析生成控制信号控制DA芯片AD5535输出电压信号，使用集成化的电压芯片实现电平转换和升压电路;上位机软件基于Qt软件开发框架在Windows平台下采用C++语言编写，实现对驱动参数的各种操作和电润湿器件电极的状态显示满足经实验验证，该系统工作性能良好(In order to achieve the drive and con