搜索资源列表
proteus 4线步进电机控制
- 51 单片机 PROTEUS 仿真 控制步进电机 加速 减速
S Step Motor AC Control.实现S形曲线升降速
- 实现S形曲线升降速，可适用于步进电机、伺服电机控制系统，加速平稳，振动很小,S-shaped curve to achieve take-off and landing speed, could be applied to stepper motor, servo motor control system, speed up the smooth, low vibration
moter.rar
- 步进电机加减速运行程序 步进电机启动时，转速由慢到快逐步加速。 步进电机匀速运行 步进电机由快到慢逐步减速到停止 ,Add speed stepper motor stepper motor to start running the program, the speed graduall
2972
- C51单片机驱动a3972步进电机细分，同时可以控制步电机加速，减速-C51 single-chip stepper motor driver a3972 broken down step-by-step motor can be controlled simultaneously to speed up, slow down
l297l298
- 基于C8051F330，L297/298步进电机控制程序，实现步进电机的正反转，加速减速，以及数码管显示转数。-Based on the C8051F330, L297/298 stepper motor control program, to achieve positive stepper motor to speed up slow down, as well as to the number of digital tube display.
cx
- AVR单片机ATmega16控制步进电机程序，发送字符A\B\C\D\E可以控制步进电机的正传、反转、加速、减速、停止-AVR Microcontroller ATmega16 stepper motor control program, sending characters A \ B \ C \ D \ E can control the stepper motor Cinema, reversal, acceleration, deceleration, and stop
motor
- 步进电机加减速运行程序 步进电机启动时，转速由慢到快逐步加速 步进电机匀速运行 步进电机由快到慢逐步减速到停止-Stepper motor stepper motor deceleration run the program starts, the speed gradually from slow to fast speed stepper motor stepper motor run by a uniform approaching slowly and gradually
dj4
- 51单片机控制步进电机，细分为2，一步为0.9度，走一圈需要400个脉冲，半径为33mm，一圈走0.10362m走20圈需要8000个脉冲。加速为4000个，减速为4000个，定时器0为60ms时周期为7.8s 为40ms时周期为5.2s-51 single-chip stepper motor control, subdivision 2, a step of 0.9 degrees, walk around 400 pulses required radius 33mm, around 20
stepmotoruln
- atmega16驱动四相步进电机，avr studio编译环境，实现电机正转反转，加速减速，上限位、下限位功能-atmega16 four-phase stepper motor driver, avr studio compiler environment, the realization of the electrical switch is turned around, to speed up slow down, the ceiling, and the minimum bit func
bujindianjijiasu
- 用C语言程序写的关于如何使用步进电机来加速的。-Written using C language program on how to use the stepper motor to accelerate.
moter2
- 用步进51单片机控制步进电机，通过制定数4*4键盘控制，旋转时间，旋转圈数，加速减速控制，主程序运用c语言-Step 51 with the stepping motor, by setting the number of 4* 4 Keyboard control, rotation time, the number of rotations, acceleration deceleration control
bjdj
- 单片机控制步进电机 KELL C源码，步进电机加速减速匀速演示、步进电机正反转调速1602显示、步进电机正反转停止实验。-Stepping motor KELL C source code, demonstrates uniform acceleration and deceleration of stepping motor, stepping motor speed control Reversible 1602 show Reversible stepping motor to stop
ULN2003 步进电机扩展板资料
- 驱动步进电机，可以达到加速，减速，恒速几种不同的状态。(The drive step motor can achieve acceleration, deceleration, and constant speed several different states.)
步进电机
- 驱动步进电机单步，多步运动，没有加速，减速运动(Drive stepper motor single step, multi-step movement)
SteppingMotor_PWM_Adc_DMA(S加速_开漏输出)
- 具有按键、LED显示、ADC等功能，采用PWM控制步进电机(With buttons, LED display, ADC and other functions, the use of PWM stepper motor contro)
1-步进程序
- 单片机控制步进电机程序，控制步进电机前进后退加速减速等多种功能(Single chip microcomputer control step motor program)
步进电机
- 用单片机实现对步进电机的控制，启动，暂停，加速，减速，速度等级显示！(MCU is used to control stepping motor, start, suspend, accelerate, decelerate and speed grade display.)
步进电机
- 驱动步进电机正反转及加速减速，数码管显示。(The stepper motor is driven to reverse and accelerate deceleration, and display by digital tube.)
1.步进电机（按频率）
- 步进电机 1. 实现的功能：按键KEY0控制两个电机的使能，按键WK_UP控制电机的正反转，按键KEY1控制电机的加速，按键KEY2控制电机的减速。初始脉冲为5Hz，每加速一次，即按键按下一次增加1Hz，减速也是减小1Hz。 2. 连接方式：电机1脉冲接PF6，方向接PF4，使能接PF10；电机2脉冲接PF7，方向接PF5，使能接PF9。 3. 程序：见源代码/1.步进电机(Stepper motor 1. realization of the function: the key KEY
步进电机驱动
- 步进电机驱动程序，其中包括正向转动、反向转动与加速转动操作。(Stepper motor driver, including forward rotation, reverse rotation and accelerated rotation operation.)