搜索资源列表
MAR1PSD
- Routine mar1psd: To compute the power spectum by AR-model parameters. Input parameters: ip : AR model order (integer) ep : White noise variance of model input (real) ts : Sample interval in seconds (real) a : Complex array of AR parame
LCD501Graphic
- 显示凌阳标志动画 涉及的库: CMacro1016.lib // 组成文件: main.c/SPLC501User.c/Sunplus_Table.c // SPLC501Driver_IO.asm/DataOSforLCD.asm // SPLC501User.h/Sunplus_Table.h // SPLC501Driver_IO.inc // // 硬件连接: LCD DB0~DB7接IOA0~IOA7 // LCD EP 接I
LCD501Ellipse
- 显示\"凌阳 科技 落实 生活\"八个汉字,分四个词在四行 // 上错开显示。 // 涉及的库: CMacro1016.lib // 组成文件: main.c/SPLC501User.c/Chinese_Table.c // SPLC501Driver_IO.asm/DataOSforLCD.asm // SPLC501User.h/Chinese_Table.h // SPLC501Driver_IO.inc // // 硬件连接: L
LCDChinese
- 先画一个实心圆,然后再画一条横线,再在实心圆上叠加显 // 显示汉字:\"凌阳科技\",最后实现向上滚屏 // 涉及的库: CMacro1016.lib // 组成文件: main.c/SPLC501User.c/Chinese_Table.c // SPLC501Driver_IO.asm/DataOSforLCD.asm // SPLC501User.h/Chinese_Table.h // SPLC501Driver_IO.inc //
25
- 用凌阳SPCE061A在LCD上显示文字、图形 A0-A7连接LCD的DB0-DB7,B3、B4、B5连接LCD的A0、R/W、EP,LCD的CS可连接到DGND
USBManagerOK
- 使用Usb cy7c68013与DSP通信,现在已经能够很正确的传递(上传数据)了。 USB资源: 使用了Ep2,Ep6 Ep2, out auto Ep6, in auto FlagA--- PF3 FlagB--- PF6 FlagC--- PF1 需要 EP2 EMPTY EP6 FULL信号 因此 FlagA--- PF3 --- EP2空 --- 8 h FlagB---
powerpc405
- power pc 405 ep核心板及其周边的原理图和pcb图
io_driver
- 1602 lcd 显示驱动 与按键监测 控制口 rs=P0^7 rw=P3^3 sbit ep=0xc4 数据接口 P2 24M时钟 显示范围为 0~9 A~Z a~z : - / < > . 按键 P1 共计16个按键键值1~16 返回0表示无键入 -1602 lcd display driver with key monitoring and control port rs = P0 ^ 7 rw = P3 ^ 3 sbit ep = 0x
MAX7044.rar
- MAX7044是基于晶振PLL 的VHF/UHF发射器芯片,在300 MHz~450 MHz频率范围内发射OOK/ASK数据,数据速率达到100 kbps,输出功率+13 dBm(50Ω负载),电源电压+2.1~+3.6 V,电流消耗在2.7 V时仅7.7 mA。工作温度范围一40℃~+125℃,采用3 mm×3 mm SOT23 - 8封装。 MAX7033是一个完全集成的低功耗CMOS超外差接收器芯片,接收频率范围在300 MHz~450 MHz的ASK信号。接收器射频输入信号范围从一11
code
- HDMI 8x8源代码(EP方案)HDMI1.3b -HDMI matrix
key_b
- 本程序主要通过外部中断INT0及3.3端口读取PS2键盘值并通过LCD1602显示,键扫描码的解码通过数组方式解码,程序的解码功能主要针对数字及大小写字母和常用标点符号 硬件描述:PS2键盘的时钟线(clk)接89S51的INT0(P3.2),数据线data接(P3.3) LCD的控制端口分别为: RS = P2^7,RW = P2^6,EP = P2^5,数据端口为P0,液晶显示偏压VL必须接 -This procedure mainly through external int
epwm_deadband
- dsp28335 pwm dead time 設定程式-dsp28335 pwm dead time setup program
2410-QT
- gx 公司的2410-ep qt试验源代吗。 还有说明文档。-gx company' s 2410-ep qt test source on behalf of you. There is documentation.
AVR-GCC_kompilator_C_dla_mikrokontroler_w_AVR
- Kurs c na AVR z EP AVR-GCC kompilator C dla mikrokontroler w AVR-Kurs c na AVR z EP AVR-GCC kompilator C dla mikrokontroler w AVR
tms320f28335_epwm_examples
- tms320f28335芯片epwm模块的详细配置及例程。其中包括epwm的dma方式、死区控制模块的配置、trip模块的配置等。-tms320f28335 chip module epwm detailed configuration and routines. These include epwm the dma way, dead-time control module configuration, trip module' s configuration.
smart_cpu_card_read_write_code_for_ED_EP
- 读写智能cpu卡,电子钱包电子存折。值得参考的资料。-write and read smart cpu card, for ED and EP function.
epwm_trip_zone07-30
- dsp280x实现输出四路PWM波形,可以改变波形的周期和占空比,输出波形的相位也不同,在示波器上能看到波形,代码全部调试合格,ccs3.1下编译通过- This program requires the DSP280x header files. // // Initially tie TZ1 (GPIO12) and TZ2 (GPIO13) high. // // During the test, monitor ePWM1 or ePWM2 outpu
TMS320x28xx(epwm)
- dsp的epwm的学习资料,具体讲述了28335epwm的内核及寄存器的此昂西内容-dsp' s epwm of learning materials
doc0818F
- • Dual ADC with 8-bit Resolution • 500 Msps Sampling Rate per Channel, 1 Gsps in interleaved Mode • Single or 1:2 Demultiplexed Output • LVDS Output Format (100Ω) • 500 mVpp Analog Input (Differential Only) • D
doc1006C
- Dual ADC with 8-bit Resolution • 1 Gsps Sampling Rate per Channel, 2 Gsps in Interleaved Mode • Single or 1:2 Demultiplexed Output • LVDS Output Format (100Ω) • 500 mVpp Analog Input (Differential Only) • Differenti