搜索资源列表
filtersofmaynkinds
- 用凯泽方程计算一个线性相位 FIR低通滤波器的阶数-Keyser equation with a linear phase FIR low-pass filter in order
FIR低通滤波器部分模块
- 一个FIR低通滤波器,最小阻带衰减-30db,带内波动小于1db．用MAXPLUS2设计与仿真。-This is a FIR LPF, with -30dB in stop-band and sigma is less than 1dB. It is designed and simulated on MAXPLUS2.
FIR
- Quartus II中滤波器的设计，里面含有高通滤波器，低通滤波器，带阻滤波器，主要用于滤除心电信号中的干扰-Quartus II filter design, which contains a high-pass filter, low-pass filter, band stop filter, mainly used for filtering of ECG signal interference
fir
- verilogHDL编写的低通滤波器模块，在ISE软件中仿真过-verilogHDL prepared by low-pass filter module, in the ISE simulation software have been
fir
- 窗口法设计fir低通滤波器matlab程序-Low-pass filter design fir
firlpfilter
- 这是一个基于CCS平台的FIR低通滤波器程序，适用于TMS320C54X系列芯片，希望和大家探讨-This is a CCS-based platform FIR low-pass filter process, applicable to TMS320C54X series chips, would like to explore
dsp6FIR
- 滤波器采样频率为600Hz ，截止频率100Hz 的10阶低通滤波器。并用汇编语言设计一个实现上面要求的FIR 滤波器 (2)要求设计滤波器采样频率为8000Hz ，截止频率500Hz 的40阶低通滤波器。用C语言设计一个实现上面要求的FIR 滤波器 -Filter sampling frequency of 600Hz, the 10 cut-off frequency 100Hz-order low-pass filter. Design and assembly language
FIR
- 已知一低通滤波器的采样率为2KHz，通带为500Hz，阻带为600 Hz，带内波动3dB，带外衰减-50dB，滤波器的相位具有线性特性，具体幅频特性见下图。要求用等波纹方法设计出该FIR滤波器，然后用TMS320C54x汇编语言编程，并在CCS下调试实现该FIR滤波器。-A low-pass filter known to the sampling rate of 2KHz, passband to 500Hz, stopband to 600 Hz, with fluctuations wit
TheDesignofFIRFilterBasedonFPGA
- 从分析FIR 数字滤波器的原理和设计方法入手,主要针对基于FPGA 实现数字滤波器乘法器的算法进行了比较研究,并通过一个8 阶FIR 低通滤波器的具体设计,简要分析比较了几种算法的优越性和缺点,从而充分发掘和利用FPGA 的高速特性。-From the analysis of FIR digital filter design theory and approach, mainly based on the realization of digital filter FPGA multiplie
FIR
- FIR低通滤波器，已在DSP试验箱上测试通过，希望对大家有帮助-FIR low-pass filter has been tested in the DSP chamber passed, want to help everyone
dspddc_R12p1
- 基于DSPbuilder搭建的DDC，里面包括CIC滤波器，FIR低通滤波器，HB半带滤波器，NCO等，实现了GC5016芯片的功能-DSPbuilder erected based on DDC, which include the CIC filter, FIR low-pass filter, HB half-band filter, NCO, etc. to achieve the function of the GC5016 chip
MATLAB-DSP-fir
- 基于MATLAB和DSP实现的FIR数字低通滤波器-Implementation based on MATLAB and DSP FIR digital low-pass filter
FIR_Filter
- verilog的32阶FIR低通滤波器描述-verilog 32-order FIR low-pass filter described
fir
- 用Verilog语言设计的一个数字FIR低通滤波器，很实用，通过modelsim仿真成功-Verilog language to design a digital FIR low-pass filter, very practical, through modelsim simulation success
FIR
- 信号处理课程设计，FIR低通滤波器的设计-Signal Processing course design, FIR low-pass filter design
FIR
- 在MATLAB中实现了FIR低通滤波器的设计仿真-In MATLAB to achieve the FIR low-pass filter design and simulation
fir
- 基于verilog的 FIR低通滤波器的实现(Implementation of FIR low pass filter based on Verilog)
fir
- fir 滤波器的程序文件和测试文件，仿真数据和matlab仿真数据进行过比对，matlab采用fdatool生成的低通滤波器，采样率为24兆，通带2.5M，截止频率为5M(FIR filter program files and test files, simulation data and MATLAB simulation data have been compared, Matlab using FDATool generated low-pass filter, sampling rat
fir滤波器
- 实现ccs软件fir低通滤波器仿真的c语言程序(C language program for CCS software FIR low pass filter simulation.)
滤波器实验报告
- 设计一个 1MHz 的 FIR 低通滤波器。 要求： ① 时钟信号频率 16MHz; ② 输入信号位宽 8bits，符号速率 16MHz ③ 要求在 Matlab 软件中进行 FIR 滤波器浮点和定点仿真，并确定 FIR 滤波器抽头系数 ④ 写出测试仿真程序。(Design a 1MHz FIR low pass filter. Requirements: (1) clock signal frequency 16MHz; (2) input signal bit width