搜索资源列表
dxf-mycsi
- 基于ARM9TDMI的CMOS摄像头驱动源程序，图像传感器为HV7131R-ARM9TDMI based on the CMOS camera driver source code, image sensors for HV7131R
temperature_test
- 自已做的温度传感器WIN服务端，用WINSOCK的UDP实验网内温度传送，打印温度曲线。客户端基于ARM Linux
Smart-Home-Systems-Project
- 智能家居系统项目源代码 基于天祥电子2440开发版 有温度差传感器D18B20的数据采集 小灯的控制 -Smart home system project source code is based Intertek electronic version of a temperature difference between the 2440 development of data acquisition sensors D18B20 the control of a small lamp
mma7660drv-0.0.6.tar
- Freescale MMA7660FC 3D传感器(G-Sensor)在linux下的驱动程序，实现了G-Sensor所有功能，已经用于实际产品-Freescale MMA7660FC 3D sensor (G-Sensor) under the linux driver to achieve all the features of the G-Sensor, has been used for the actual product
tmp101
- dm6467中I2C总线下温度传感器tmp101驱动源码-dm6467 in the I2C bus driver source code under the temperature sensor tmp101
AVRC
- 在linux下调试 陀螺仪 和 加速度传感器 参数设置，里面的文件已调试好 可已在 AVR Gcc下直接运行-Under the debugger in linux gyroscope and acceleration sensor parameter setting, which the document has a good debugging AVR Gcc may have been under the direct operation
ds18b20_time
- 本程序是基于arm9平台，用qt4.5.3编写的，实现提取温度传感器ds18b20的值，便在显示屏上显示-This procedure is based on the arm9 platform, with qt4.5.3 prepared to realize the value of the extraction temperature sensor ds18b20 will appear on the screen
BlinkToRadio
- tinyos下的BLINKRADIO程序，用以无线传感器的节点。-TinyOS BLINKRADIO under the procedure for wireless sensor nodes.
danpianji
- 温度传感器和51单片机开发的温度检测系统源代码-Temperature sensors and the development of 51 single-chip temperature detection system source code
document
- 硬件： 1. 车体 2. S3C2410A开发板 3. 红外测距传感器 4. 伺服器（舵机） 5. 直流电机 6. 电机驱动板 7. 电源 软件： 1. Linux2.6.14内核，包括：Nand Flash、USB、NET、PWM、ADC等驱动；Yaffs等文件系统。 2. VIVI 3. Busybox1.6 主要目标： 使车体能自主地在平地行驶，能躲避一定高度和大小的障碍物。 -Hardware: 1. Carbody 2
MDA320Citation
- 无线传感器网络扩展板mda320励磁电压控制程序。因之前的励磁电压供电周期和供电的持续时间都是固定的，不同的传感器需要的供电持续时间不一样，需要动态调控，所以开发该程序自动控制供电持续时间-mda320 extension board test program the aim is to dynamiclly control the Power Cycle
IR
- 调节周立功公司设计的电脑鼠的红外传感器的程序、-Regulation ZLG-designed computer mouse' s infrared sensor process
18b20
- 基于嵌入式linux的温度传感器DS18B20的驱动程序，和测试程序-Temperature sensor based on embedded linux DS18B20 drivers, and test procedures
7455
- mma7455 重力加速度传感器的驱动程序-mma7455 driver
sensor_board_class270
- S3C2410传感器应用，实现传感器扩展板的功能-S3C2410 sensor applications, the functions of the sensor expansion board
18b20
- 18b20温度传感器，用proteus画的图，并且可以仿真-18b20 temperature sensor, with proteus the drawing, and can simulate
ATOS
- 熟习无线传感器开发ATOS平台的使用和开发自己的传感器应用程序基于nesC语言-ATOS wireless sensor development platform to familiarize themselves with the use and develop their own language nesC-based sensor applications
agriculture
- 嵌入式Linux终端上用来读空气、土壤温度、湿度等传感器的代码，应用于农业大棚项目。-Embedded Linux terminal used to read the air, soil temperature, humidity and other sensors in the code, for agricultural greenhouse project.
wd-ds18b20
- 针对kernel=linux-TQ2440-2.6.30.4 的ds18b20温度传感器驱动程序 //功能:linux下的ds18b20驱动程序-For kernel = linux-TQ2440-2.6.30.4 of ds18b20 temperature sensor driver// Function: linux drivers under ds18b20
基于mwc的飞控及传感器全套代码
- 基于mwc的飞控及传感器全套代码stm32移植（硬i2c+传感器自测）（未测试待测试）(Mwc-based flight control and sensor code STM32 transplantation (hard I2C + sensor self-test) (not tested to be tested))