搜索资源列表
netswitch
- 在有名的开源elphel 333 系列网络摄像机基础上，本人设计了RS485到ETRAX 100 LX的串口的转换板，用于控制云台，此代码为完整的，包含客户端的控制用的FLASH，以及服务端的服务程序源代码。-revenue in the famous series elphel 333 network camera based on I designed a RS485 ETRAX 100 LX to the serial conversion boards, for the control
2410_Monito
- source for s3c2410 test program,including lcd ,nand flash ,uart and so on
nand_flash_read
- FLASH的读写程序.很适合开发折使用... 大家都来下-FLASH program of reading and writing. Very suitable for the development of folding ... we all use to the next
SJF2440
- SJF2449 can program SMDK2440 flash memory
mtdwrite
- 嵌入式linux下，用户模式下更新Flash内容的代码，mtdwrit.c是用户程序，mtdchar.c是内核驱动程序代码，需要和原有代码比较更新。-Embedded linux user mode code to update Flash content, mtdwrit.c is a user program, mtdchar.c is a kernel driver code, compare the needs and update the original code.
S3C2410_BIOS
- 优龙开发板FS2410启动BIOS，主要功能有文件下载、FLASH烧写、启动存储在FLASH中的程序、设置启动参数、设置Wince或Linux的自启动。-Development board FS2410 EURONAVY start the BIOS, the main functions file downloads, FLASH programmer, start the program stored in FLASH, set the startup parameters set Winc
sjf2440_Rev01
- 三星公司sjf2440源代码 三星公司官方JTAG下载工具SJF2440源代码下载-SJF2440 can program SMDK2440 flash memory (K9S1208,Intel E28F128,AMD29LV800BB) through JTAG port and read/write data from/to a specified address.
linux_9263_nandBoot
- 包含了ATMEL9263从NANDFLASH启动的 启动程序 内核及文件系统 只要执行脚步文件就可以自动通过SAM-BA烧写到flash中-Contains ATMEL9263 start from the startup program NANDFLASH kernel and file system files as long as the implementation of the steps can be automated through the SAM-BA programmed t
2440_nand_-K9K2G16
- 本程序是ADS1.2环境下的2440裸奔程序，实现NAND Flash读取的驱动，希望有参考价值。-This program is under the 2440 ADS1.2 streaking procedure, read the drive to achieve SD, hope to have reference value.
omapfl-1.0
- OMAP Flash Loader This replacement can program the Spectrum Digital OMAP5912OSK evaluation boards. It can also program version D boards, that the original program can t. Also, this program is for Linux (and perhaps other Unixes), not for M$-
DMC2440I
- DMC-2440-I采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz，最高主频可达533MHz。板载64MB的SDRAM，128MB的Nand Flash以及2MB的Nor Flash。DMC-2440-I是根据S3C2440A的全部功能而开发的全功能嵌入式系统。具有外接资源丰富，性能稳定，低功耗低等特点。适合手持设备的设计开发。支持嵌入式Linux和WINCE5.0.NET操作系统。提供Wince5.0 BSP。 采用linux-2.6.29 内核