搜索资源列表
STM32-MOTOR-ucgui-ucos-MINI
- 在STM32单片机上实现ucgui,并输出PWM控制3个步进电机，ucgui可以设置3个电机的控制参数，是公司请外面的人研发的。-To achieve the STM32 microcontroller ucgui, and outputs the PWM control three stepper motors, ucgui can set three parameters of motor control, the company developed an outside person.
ARM_GSM_OK
- STM32和无线模块TC35实现通信，实现接受和发送短信-STM32 and TC35 wireless module for communication, to receive and send text messages to achieve
DAC
- stm32的DA转换程序，开发软件是keil4-Stm32 of DA conversion program, develop software is keil4
RTC_stm32
- 用stm32的RTC做的实时时钟，编译软件为keil MDK。-Stm32 the RTC to do with real-time clock, the compiler software for keil MDK.
EEPROM_emulation
- STM32的内部FLASH的模拟的EEProm-STM32 internal FLASH simulation of Eeprom
ucos-II-V2.86-ucgui-3.9-DEMO
- 演示了ucosII下的ucgui的demo,采用了2.8寸TFT彩色触摸屏和STM32F103芯片-Demonstrates ucosII ucgui under the demo, with a 2.8-inch TFT color touch screen and STM32F103 chip
ucosPucgui(FSMC)
- ucos+ucgui例程，主控芯片为STM32，LCD采用FSMC接口连接，实现图形界面的操作-ucos+ucgui routines, the main chip for the STM32, the LCD FSMC interface connector, the operation of the graphical interface
ucosPucgui
- 该程序是在keilC++环境下开发的arm单片机3.0寸液晶屏驱动程序。-The program is in the arm microcontroller ucos+ucgui development keilC++ environment (3.0 inch screen) programming procedures.
Based-on-ucos-II-P-ucgui-super-DEMO
- (1) 提供一个基于u/COS-II操作系统的应用程序框架 (2) 演示如何创建多个任务 (3) 演示如何使用邮箱进行两个任务之间的通信-(1) provides an application framework based on the u/COS-II operating system (2) shows how to create multiple tasks (3) demonstrates how to use the E-mail communication between
ucgui-manual-in-Chinese
- ucos移植相关资料和参考，有需要的可以看看挺不错-ucos transplant-related information and references, if necessary, can look quite good
22.ucosPucgui
- 22.ucos+ucgui(神舟III号，FSMC 2.8寸 支持9320和持8989)
21.MP3
- 22.ucos+ucgui(神舟III号，FSMC 2.8寸 支持9320和持8989)
stm32F207_to_ssd1963
- 基于STM32F207移植的ucos和ucgui，采用7寸LCD,驱动为ssd1964-The STM32F207 transplantation ucos and ucgui of, a 7-inch LCD, driven ssd1964
STM32-CAN-ucgui-ucos
- 基于ucgui3.90 建立了点选框，可以选择7档CAN通信速率，建立一个文本编辑框作为接收CAN通信报文，建立了5个按钮，4个按钮作为测试报文数据发送，1个按钮作为清除接收文本区。-Establish a point-based ucgui3.90 box, you can select 7 files CAN communication rate, create a text edit box as a receiving CAN communication message, the est
STM3--SD-Fatfs-ucgui-ucos
- 基于奋斗ＳＴＭ３２单片机＋ｕｃｏｓ＋ucgui3.90 的ＳＤ读卡程序－建立了一个对话框，对话框里的列表框作为文件选择区，文本框作为文件内容显示区，磁盘介质采用了TF卡，在上面移植了FATFS0.09a，支持中文文件名及长文件名，由于是受内存的限制，只是做了能读取文件的头512个字节内容显示出来-Struggle based STM32 MCU+ ucos+ ucgui3.90 the SD Card Reader program- set up a dialog box as a file i
ucgui
- stm32F107 ucos+ucgui
ucos-II-PInterntePucgui
- STM32F107的ucos II +以太网+ucgui-The ucos II+ STM32F107 Ethernet+ucgui
STM32-LED-ucos-
- 适用于V5板的 ucgui ucos 应用例程 stm32-led闪烁—ucos-信号量 -Applies to V5 board ucgui ucos application routines stm32-led flashing-ucos- semaphore
GUI_Calculate_v1.0
- ucgui工程文件，纯洁版可用来做移植。-ucgui ucos
STM32-NRF24L01-2.4G-for-ucgui-ucos
- stm32控制NRF24L01通讯模块实验的程序源码，2.4G通信-stm32 control NRF24L01 communication module test program source code, 2.4G communications