搜索资源列表
LCD.driver
- 文件名：lcd_driver.vhd。 --功能：FGAD驱动LCD显示中文字符“年”。
USB驱动程序编程
- 基本的usb驱动程序的编程方法,值得一看.-Basic programing method for USB driver, worth reading
iic 用verilog语言写的FPGA iic驱动程序
- 用verilog语言写的FPGA iic驱动程序，实现对存储器的读写，有需要的可以下载看看哦！-Language used to write verilog FPGA iic driver to achieve the memory read and write, there is a need can be downloaded to see Oh!
S8_VGA.VGA显示接口的verilog控制程序
- VGA显示接口的verilog控制程序。用于VGA显示器的控制驱动,VGA display interface Verilog control procedures. Control for VGA display driver
sd_reader.rar
- SD卡读卡器模块的VHDL及软件驱动代码，可作为外设挂接在Avalon总线上。支持以SD模式、4线模式读取。在24MHz时钟驱动下读取速率可达8MByte/s,SD card reader module and software drivers VHDL code, can be articulated as a peripheral bus in Avalon. To support the SD model, 4-wire mode read. Driven by the 24MHz clo
液晶显示驱动源程序代码
- 液晶显示驱动源程序代码，所用芯片为ILI9325，用的是verilog 编写,Liquid crystal display driver source code, used by chips for ILI9325, prepared using a Verilog
CCD-driver
- CCD芯片驱动VHDL程序，CCD型号TC253SPD -CCD chip driver VHDL program, CCD models TC253SPD
usb-driver
- Xilinx USB下载线 Linux驱动，支持原来并口线，以及现在USB线，最重要的是支持基于FT2232的简易USB JTAG，FT2232不仅可以通过OpenOCD调ARM，还可以下载Xilinx FPGA了！-linux driver of Xilinx USB Platform cable, support xilinx usb cable and parallel cable, in addition, it support usb jtag based on FT2232!
UART2_vhdl
- 这是VHDL语言的uart串口驱动 感觉很难写的 但是这个可以移植的 比较好-This is the VHDL language serial uart driver feel it is very difficult but this can be written by transplantation is better huh
uart_Transmitter
- 自己写的一个uart驱动代码，是一个工程文件，适合初学者，里面的状态机的写法十分值得学习-To write a uart driver code, is a project file, suitable for beginners, which the wording of the state machine is worth learning
display
- vhdl,七段数码管驱动程序，完成数字显示功能-vhdl, seven-segment digital tube driver, complete the digital display
LCD
- 基于XILINX公司的FPGA的液晶显示驱动程序代码-XILINX' s FPGA-based LCD driver code
lcd
- verilong实现的12864液晶驱动程序，显示一幅图像-verilong achieved 12864 LCD driver, display an image
lcd
- SPARTAN 3E 开发板驱动程序 Verilog源码 对于数字电路设计是很好的参考资料-SPARTAN 3E development board driver for digital circuit design, Verilog source code is a good reference
_5_lcd1602_test
- 基于nios的1602显示处理，并不是io口模拟驱动的，而是用verilog写好的驱动程序-Nios display processing based on the 1602, not io port simulation-driven, but with drivers written verilog
DNC12-test
- 128细分的步进电机驱动程序，有需要的朋友可以看看。-128 segments of the stepper motor driver, a friend in need can look at.
USB-Blaste-driver--instructions
- FPGA下载线USB Blaster驱动安装说明-The FPGA download line USB Blaster driver installation instructions
ADC0804-Driver
- FPGA 本实验是用 驱动 adc0804 这个芯片，由于驱动这个芯片要使用有一定的时序控制，所以本实验用状态机来控制-The experiment is driven FPGA adc0804 this chip, the chip to be used as drivers have a certain timing control, so the state machine to control the experiment
LCD-driver
- 用于xilinx显示驱动,原理为通过计数来达到最终的在液晶屏显示的任务-the driver of xilinx 3e lcd
uart-driver
- STC12LE5A32S2单片机的串口收发驱动函数，包括串口初始化，串口读写函数。-STC12LE5A32S2 single-chip serial transceivers drive functions, including the serial read and write operations.