搜索资源列表
-
0下载：
三容水箱的模糊控制设计，连接pc2006数据卡，运用模糊控制和自适应控制水位，利用vc＋＋编写界面。-three-tank design of fuzzy control, connectivity pc2006 data card, fuzzy control and adaptive control of the water level, using vc + + interface.
-
-
0下载：
Nonlinear model predictive control (planning) for level control in a surge tank
-
-
0下载：
水箱液位模糊控制仿真和sugeno模糊控制仿真程序-Tank level fuzzy control method and fuzzy control simulation program sugeno
-
-
0下载：
神经PID控制在双容水箱液位控制的实验研究-Neural PID control of two-tank water level control in the experimental study
-
-
0下载：
Tank Level Control using PID
-
-
0下载：
该电路由一片四双向模拟开关集成电路CD4066为核心构成。每个电路内部有四个独立的能控制数字或模拟信号传送的开关。当水箱无水时，由于180K电阻的作用，使四个开关的控制端为低电平，开关断开，LED 不发光。随着水位的增加, 由于水的导电特性，使得IC的13脚为高电平，S1接通，LED1点亮。当水位逐渐增加时，LED依次发光指示水位。水满时， LED4发光， 显示水满。同时T1导通， B发出报警声，提示水已满。不需要报警声时，断开开关K即可。 -The circuit consists of a
-
-
0下载：
针对四个水箱的水位控制用预测控制方法编写的一段matlab程序，希望有用。-Four water tanks for water level control with a predictive control method matlab program written in the hope that useful.
-
-
0下载：
利用动态矩阵控制算法对单容水箱的液位进行控制-Dynamic matrix control algorithm using a single tank liquid level control
-
-
0下载：
利用单神经元控制算法，对单容水箱的液位进行控制。-Control algorithm using a single neuron, single tank liquid level control.
-
-
0下载：
未校正三容水箱液位控制系统仿真 基于Matlab的控制系统仿真处理-Uncorrected three-tank water level control simulation control system simulation based on Matlab treatment
-
-
0下载：
球形液罐模型仿真，就是对液位就行控制，使之稳定。-Spherical tank model simulation, is the level control on the line to make it stable.
-
-
0下载：
水箱水位调节，模糊控制，有word文档说明，在说明的基础上进行编程实现。-Tank water-level control, fuzzy control, there are word documents stated in the descr iption on the basis of programming.
-
-
0下载：
一个简单的二阶水箱控制系统，采用了先进的串级控制器，实现了水位的控制-A simple second-order water tank control system, using advanced cascade controller, to achieve a level of control
-
-
1下载：
一个水箱的控制系统，实现了液位和温度控制，温度采用预测控制。-A water tank in the control system, realized the liquid level and temperature control, temperature using predictive control.
-
-
0下载：
We have a cylindrical tank with cross-sectional area, Ac. Liquid flows in at a rate Fi and
liquid flows out at a constant rate Fo. We want to control the tank liquid level h using a level
controller to change the liquid level set height hs. The a
-
-
0下载：
这是关于水箱液位的模糊PID控制程序，基于matlab的simulink建模，仿真通过，模糊规则包含在文件夹内-This is the tank level fuzzy PID control procedures, based the Matlab simulink modeling, simulation, fuzzy rules contained in a folder within
-
-
0下载：
model of tank in sumulink. compared non-linear and linearized model to a set point change.
-
-
0下载：
Nonlinear model predictive control (planning) for level control in a surge tank
-
-
0下载：
基于matlab的倒锥形水箱液面的模糊控制系统-Matlab fuzzy control system of an inverted conical tank level
-
-
0下载：
针对双容水箱液位会受到外界环境干扰和内部摄动的影响，导致水箱液位出现较大波动等问题，提出将模糊控制技术与PID控制相结合的自适应水箱液位控制方法，设计出自适应模糊PID控制器。-Aiming at the problem that the level of the double-tank is affected by the disturbance of the external environment and the internal perturbation, the water level
-
