搜索资源列表
ESPRIT
- ESPRIT 相关资料，宽带信号 虚拟旋转不变性 虚拟阵列 不需要特征值分解的ESPRIT-ESPRIT information, broadband signal does not need virtual virtual array rotation invariance of the ESPRIT eigenvalue decomposition
matched_filter.rar
- 匹配滤波的实际仿真程序。分别对宽带和窄带信号进行了仿真，并且求的滤波后信号的信噪比。,Matched filtering of the actual simulation program. Separately for broadband and narrowband signals, simulation, and after filtering for signal-noise ratio.
upsampex
- 上采样和内插，使得系统中同时出现的窄带信号和宽带信号能够采用适合本信号的采样率-On sampling and interpolation, making the system at the same time, the narrowband signals and broadband signals can be used for the signal sampling rate
widesignal
- 高斯噪声环境下宽带矢量信号仿真-Gaussian noise environment simulation of broadband vector signal
twocircle
- 现今阵列应用中，宽带信号的处理越来越多。由同心圆阵组成的多圈圆形阵列在宽带信号处理上有更强的优势。和单圈均匀圆阵相比，同心多圈圆阵的嵌套设计阵列工作频率范围更宽，同时，灵活性增强。 -Nowadays array applications, the broadband signals in many more and more treatment. By the array composed of many concentric circular ring array of broadban
identification
- 使用FFT变换在频域对宽带扩频信号中的正弦干扰信号进行识别和抑制，其中扩频信号由1024点的伪随机序列表示-FFT transform the use of broadband in the frequency domain spread spectrum signal of sinusoidal interference signal identification and suppression, in which spread spectrum signal points from 1024
plx_new
- 该文档时一个宽带信号处理的源代码，被验证是成功的，可以供学习练手-The document, a broadband signal processing, source code, to be verified to be successful, you can study and practice for hand
tops
- 一篇关于TOPS的有用宽带信号测向方法，一篇关于TOPS的有用宽带信号测向方法-TOPS useful article on the method of measurement of broadband signals, a broadband signal on the TOPS useful method of finding
EficientQAMmodulationsystemofsoftwaredefinedradiop
- 在分析高效宽频带变频系统的基础上提出一种可以把变频部分与多种调制方式灵活结合在一起的方法，并以QAM调制为例，给出具体算法．分析结果表明，该方法降低了对处理速率的要求，提高了处理能力-In order to design an efficient and flexible DDC／DUC system，this paper combined the signal processing of DDC／DUC with QAM system and presented a new method ba
wide-band-signal-DOA-mode-space
- 均匀圆阵模式空间下估计信号源方向，信号源为宽带-Under the uniform circular array pattern space is estimated source direction, the signal source for broadband
armaguji
- 实现一个ARMA模型的功率谱估计，实例中承载的是窄带信号，也可以改成宽带信号的-ARMA model to achieve a power spectrum estimation, the instance is hosted in narrow-band signals into a broadband signal can also be
WCMSR
- 宽带信号协方差矩阵稀疏表示DOA估计算法仿真-The broadband signal covariance matrix sparse said DOA estimation algorithm simulation
Bessel-function-of-the-virtual-array
- 基于贝塞尔函数的虚拟阵列的角度估计，实现宽带信号的DOA估计-Based on the angle of the Bessel functions of the Virtual Array estimated broadband signal DOA estimation
subband_CAF
- 该程序是一种子带的模糊函数程序，该程序主要是将宽带信号分成若干子带，然后每个子带做模糊函数，最后再合成-The program is a sub-band ambiguity function program, the main procedures is the broadband signal is divided into several sub-band, and then each sub-band fuzzy function, and finally resynthesis
jinmvdr
- 编程实现了一种近场MVDR算法，包括对宽带信号的构造 以及宽带mvdr的实现-Programming a near-field MVDR algorithms, including broadband signal structure and implementation of broadband mvdr
channelization_polyphase
- 该程序利用多相滤波结构实现了宽带信号的信道化，相比传统信道化方法，节省了资源，提高了效率。-The program uses the polyphase filter structure to achieve a broadband signal channelization, compared to traditional methods channel, save resources and improve efficiency.
Direct-sequence-spread
- 发射机的设计是采用m序列来扩展二进制数据流，将其扩频为宽频信号，并采用QPSK调制方式将信号调制后发送出去。信号经过AWGN信道传输到接收端。接收机采用相干解调原理解调信号，采用的解扩码序列与发射机扩频码序列完全相同，信号经解扩调制后，带宽恢复原始宽度。-Transmitter design is the use of m sequence to expand the binary data stream, the spread spectrum is a broadband signal, a
CS_wideband_DOA
- 本代码是宽带DOA估计matlab代码，信号源是BPSK信号，采用一般线性阵列或均匀线性阵列接收，共涉及频谱已知和未知两种情况。并且各部分均单独编写了m函数。-This code is used to conduct DOA of a broadband signal. The signal source is BPSK, with a general linear array or uniform linear array. Each of these cases includes two
lisanxinhao
- 单频/宽频信号仿真及频谱分析，声纳信号分析中的信号采样、信号截取、窗函数加权、信号滤波、频谱分析-Single frequency/broadband signal simulation and spectrum analysis
wideband
- 宽带波束形成程序，用于宽带信号处理及波达方向估计(broadband signal processing)