搜索资源列表
windspeedtext
- "wind turbine" 風機的風能計算程式, 可改風速/旋翼角/環境溫度溫度,即可算出轉子轉速/風功率/葉片末端速度/Vt/Vw:尖端速度比-" Wind turbine" wind fan calculation program can change the speed/rotor angle/ambient temperature, to calculate the rotor speed/wind power/blade terminal velocity/Vt
NewModel_PUBLIC
- 四旋翼飞行器在MATLAB下的建模程序，非常好，非常真实-Four-rotor aircraft under the MATLAB modeling program, very good, very durable
四旋翼matlab仿真
- 简单的PID控制四旋翼飞行器，姿态采用PID控制，内有四旋翼模型，电机模型
初始对准matlab程序
- 基于四旋翼飞行器初始欧拉角没有对准问题，提出了解决方案。(Based on the initial rotation angle of the four rotorcraft, the solution is proposed.)
$RE9HDTO
- 利用MATLAB实现多旋翼无人机的多机编队仿真，包括三维模型绘制，pid参数计算，利用GUI实现人机交互界面，实时显示各架飞机的状态。(Using MATLAB to achieve multi-rotor UAV multi-aircraft formation simulation, including three-dimensional model rendering, pid parameter calculation, the use of GUI to achieve human-c
quadrotor
- MATLAB Simulink模型 四旋翼无人机 动力学仿真模型 3D动画 代码(MATLAB Simulink model four rotor UAV dynamics simulation model 3D animation code)
model
- 本程序可以仿真四旋翼飞行器的飞行，可以设计飞行器控制律，完整的，可以使用，环境是MATLAB(This program can simulate the flight of the four rotor aircraft, you can design aircraft control law, complete, you can use, the environment is MATLAB)
四旋翼滑模控制matlab仿真
- 用于四旋翼的建模、滑模控制的matlab仿真程序的学习和指导！(The learning and guidance for the modeling of the four rotor, the MATLAB simulation program of sliding mode control.)
仿真
- 四旋翼无人机的动力学模型建模验证分析，模拟运行飞行器的飞行过程。(Four, the dynamic model of rotor UAV is modeled and analyzed to simulate the flight process of the running aircraft.)
quadcopter
- 关于四旋翼串级PID控制算法的MATLAB仿真。使用SIMULINK模块搭建。(The MATLAB simulation of the four rotor cascade PID control algorithm is presented. Using the SIMULINK module to build)
四旋翼飞行器动力学建模与简单控制
- 基于Simulink的四旋翼飞行器动力学建模与简单PID控制.有相关文献。(Dynamic modeling and simple PID control of four rotor aircraft based on Simulink.)
quadcopter_simulator_in_matlab-master
- 四旋翼仿真，啦啦啦啦啦绿绿绿啦啦啦啦啦啦啦啦啦啦啦啦绿绿绿(Four rotor simulation)
四旋翼模型
- 四旋翼无人机MATLAB S函数仿真 程序代码(Code of MATLAB S Function Simulation Program for Four-Rotor Unmanned Aerial Vehicle)
QuadcopterModel
- 本文档为四旋翼3D模型，可用于matlab simmechanics控制可视化仿真(This document is a Four-rotor 3D model, which can be used for visual simulation of MATLAB SimMechanics control.)
gaodu
- 四旋翼无人机是一种具有六个自由度和四个输入的欠驱动强耦合、外型新颖结构简单的飞行器。由于其具有制造成本地、重量轻、体积小、操作简单、使用方便、隐身性好、对作战环境要求低的特点，使其能准确、高效的执行各种军事或民用任务，因此四旋翼无人机具有一定的军事和民用价值。本课题针对四旋翼无人机的特点和飞行原理，对其动力学分析以及运动控制的研究，利用牛顿—欧拉方程，建立了四旋翼无人机的动力学模型,并针对该模型设计了PID四通道控制系统,且在Matlab/Simulink仿真平台上,利用PID控制系统对四旋翼无
Matlab四旋翼simulink控制系统仿真
- 四旋翼Matlab simulink 仿真(Four Rotor matlab simulink Simulation)
四旋翼MATLAB仿真
- 通过MATLAB建立simulink模型以及进行仿真程序编写，实现3D环境下的动态环境效果演示。
四旋翼飞行器模型
- matlab四旋翼无人机仿真程序，运行scr ipt2即可，在界面中给出位置即可。(Matlab four rotor UAV simulation program, running scr ipt2 can be, given the position in the interface can be.)
lab1
- 无人机模型建模仿真，可通过此仿真模型实现，四旋翼无人机的模型建立(Modeling and Simulation of UAV model can be realized by this simulation model, and the model of Four-rotor UAV can be established.)
四旋翼无人机PD控制仿真程序
- 基于MATLAB的四旋翼无人机PD轨迹跟踪算法，能较好地实现轨迹跟踪(PD trajectory tracking algorithm of four rotor UAV Based on Matlab can achieve better trajectory tracking)