搜索资源列表
CYPRESS_Memtest
- This directory contains the memtest 8051 firmware for the Anchor Chips EZ-USB chip. The purpose of this software is to test the different memory segments in the Ez-Usb chip. This example will output the string \"good\" on the 7 segment
cpress_Memtest
- This directory contains the memtest 8051 firmware for the Anchor Chips EZ-USB chip. The purpose of this software is to test the different memory segments in the Ez-Usb chip. This example will output the string \"good\" on the 7 segment
seg7
- 7 segment controller for 8051
7SEG
- its is an 7 segment dispaly source code for 8051 controller.
Memtest
- 基于CYPRESS CY7C68013 usb2.0的开发程序，该程序演示了访问内存的编写方法。-This directory contains the memtest 8051 firmware for the Anchor Chips EZ-USB chip. The purpose of this software is to test the different memory segments in the Ez-Usb chip. This example
ex4-10
- 程序描述：这个范例说明如何使用8051，以及汇编语言的程序连结， 当我们按下向上数的按钮之后，程序就会把0到9的共 阳7段显示器字型码存入AT93C46；如果我们按下向下 数的按钮之后，程序就会把9到0的共阳7段显示器字 型码存入AT93C46。 程序每一次重新开始执行时(Power on 或是Reset)，8051 会先从AT93C46当中读出最前面的10个位组，然后 就反复地将这10个位组的数据经由PORT 1送到1个 共阳七段显示器。*/-Procedur
EEPROM
- 8051 for 7 segment display
8051_7seg.c
- 8051 to display numbers on 7 segment LEDs.
multi_7_seg_count
- 7 segment display for 8051 controller
practica-2
- rutines for control of 7 segment display for 8051 microcontroller family
7SEG
- 8051 interfacing with 7 segment led source code.
seg-7
- Code for 7 segment led display with 8051
8051uc
- 7 segment LED multiplexed using 8051 mcu full circuit and codes-7 segment LED multiplexed using 8051 mcu full circuit and codes
51-4-way-game-buzzer
- this code is for a game show buzzer based on 8051 microcontroller which allow up to 4 player to participate in.the button pressed first will display on a 7 segment LED display and will turn on the buzzer for a second,the system will restart itself af
serial_segment
- This code can run serial 7 segment display by using 8051 microcontroller
8051
- Embedded 8051 C codes for led, 7 segment, lcd, gsm
7
- interface 8051 with 7 segment keil comelier used
8051-programmable-power-supply
- Circuit Operation: Circuit diagram appears in the 0-5 the entered value the keypad circuit, which is connected to port P1 applied to the integrated DAC 0808 DAC output is obtained the analog voltage. P0 port is connected to the 7-segment display of t
seven segment 2 digit
- programmed in KEIL C for TWO DIGIT of SEVEN SEGMENT LED
PC-Serial-RS232-Port-Interface-To-7-Segment
- PC-Serial-RS232-Port-Interface-To-7-Segment