搜索资源列表
IRQ
- 用于ARM IRQ在嵌入式系统中的中断处理程序-IRQ for the ARM Embedded System of interrupt handling procedures
ARM-run-in-uCOS-II
- uCOS在ARM（LPC2220）上的移植代码 共四个文件：IRQ.INC OS_CPU.H Os_cpu_c.c Os_cpu_a.s-for uCOS on ARM (LPC2220), a total of four transplant code documents : IRQ.INC OS_CPU.H Os_cpu_c.c Os_cpu_a.s
EXINT
- ARM-s3c44b0_B2开发板通用非向量IRQ中断的实现.-ARM-s3c44b0_B2 Development Board generic non-vector IRQ realized.
ARMask
- ARMask.The ARM has six operating modes: • User (unprivileged mode under which most tasks run) • FIQ (entered when a high priority (fast) interrupt is raised) • IRQ (entered when a low priority (normal) interrupt is raised) R
S3C241-irq
- ARM处理器在嵌入式系统中的地位越来越重要，S3C2410作为 ARM9微处理器家族中的一员，应用已十分广泛。文中简述了ARM处理器 的中断异常种类、响应和返回过程；重点讨论了S3C2410中断控制器的结 构和处理机制，以及对IRQ中断的具体处理流程，最后给出了详细的参考 代码
MultiInterruptIRQ
- 基于ARM的44B0开发板的中断IRQ程序的原代码
arm irq
- arm irq
arm的irq学习驱动
- 这个是arm的irq学习驱动
irq
- 中断驱动 S3C2440 实现arm-linux下中断驱动-irq driver for s3c2440
UDiskDemo
- 文件及文件夹说明 =============================================================================================== \arm\ uC/OS-II移植代码 \SOURCE\ uC/OS-II源码保存在该文件夹 \HostMassLib\ HostMassLib驱动库相关文件存放的文件夹 \HostMassLib\读写U盘模块驱动使用手册.pdf 驱动库使用手
IRQ
- ARM嵌入式系统关于IRQ中断处理基于c语言的实验代码-ARM Embedded System on the IRQ interrupt handling of the experiment based on the c language code
cfw1
- How to Use IRQ in SAMSUNG s 2440 platfrom.( WinCE 5.0),This function Demo when we get IRQ in ARM SAMSUNG s 2440 chip and pass this IRQ to our function.-How to Use IRQ in SAMSUNG' s 2440 platfrom. (WinCE 5.0), This function Demo when we get IRQ in
uCOS-II_LPC2000
- ucos移植到LPC2100系列的代码，包括标准版ARM移植代码和高效版ARM移植代码。文件有：OS_CPU.H Os_cpu_a.s Os_cpu_c.c IRQ.inc-ucos transplanted to LPC2100 series of code, including Standard Edition, version of ARM porting code and efficient portable code for ARM. Documents: OS_CPU.H Os_cp
The.ARM.Instruction.Set.ARM.University.Program.ra
- The ARM has six operating modes: • User (unprivileged mode under which most tasks run) • FIQ (entered when a high priority (fast) interrupt is raised) • IRQ (entered when a low priority (normal) interrupt is raised) • Supe
lpc200_Startup_code
- lpc2000系列ARM处理器启动代码 支持IRQ中断-lpc2000 series ARM processor startup code
S3C2410-init
- 基于ARM9芯片S3C2410异常中断程序设计。验证的代码详细分析了基于ARM嵌入式系统的异常处理流程。然后阐明关键字“-irq”的作用，设计出中断处理函数。最后，通过设置中断控制寄存器，设计外部中断EINT3的初始化程序，并给出主程序流程图。实践证明程序运行稳定可靠。-S3C2410 ARM9-based chip exception interrupt programming. Detailed analysis of the code verification of embedded sy
key
- arm裸板驱动开发key操作的相关代码，由clock.c gpio.c key.c irq.c等组成
IRQ
- arm irq arm irq arm irq-arm irq arm irqarm irqarm irq
s3c6410-irq-drive
- 基于arm三星s3c6410红外驱动程序源代码！-s3c6410 irq drive
versatile-fpga-irq
- ARM Versatile FPGA interrupt controller.