搜索资源列表
PWM
- 用于产生pwm波形，控制电机的转动，可以调节转速，转向等-Used to generate pwm waveform, control the motor rotation, can adjust the speed, steering, etc.
ADC0808+PWM
- 数模转换，控制pwm波形输出，51单片机，C语言。-Digital-analog conversion, control pwm waveform output, 51 single-chip, C language.
PWM
- DSP2812的PWM波形产生样例程序 经过实验验证-The PWM waveform generation DSP2812 through experimental verification sample program
pwm
- 实现PWM波型....使用VHDL语言-Realization of PWM waveform using the VHDL language ....
PWM
- TMS320F2812中PWM波形的产生-TMS320F2812 in the PWM waveform generated
multiple-pwm
- 本资料用于实现avr单片机的多路pwm波形输出，提供了一种简单的思路-The data for the realization of multi-avr microcontroller pwm waveform output, provides a simple train of thought
PWM
- lpc2103的输出pwm波形程序，调试通过。-lpc2103' s output pwm waveform program debugging through.
pwm
- 运用FPGA 产生pwm脉宽调制信号的源代码-use fpga generate pwm signal
2410-pwm
- 2410 pwm波形 驱动程序代码，通过传递参数可调节占空比，含makefile文件和测试程序-2410 pwm waveform driver code, passing parameters can be adjusted by the duty cycle, containing makefile documentation and testing procedures
PWM
- 2812产生PWM波形的全部文件，稍做修改可以直接使用-2812 PWM waveform produced all the documents with minor modification can be used directly
pwm
- PWM脉冲产生代码，程序采用VHDL硬件描述语言！很有参考价值-PWM pulse generation code, the program using VHDL hardware descr iption language! Useful reference
pwm
- DSP2812的例程，产生6路PWM波形，用示波器观察-DSP2812 routine, resulting in 6-channel PWM waveform with an oscilloscope
PWM
- 该程序用于使CCP1模块产生分辨率为10位的PWM波形，占空比为50 ，PIC单片机系列。-CCP1 module of the program used to generate 10-bit resolution PWM waveform, duty cycle 50 , PIC microcontroller series.
pwm
- 基于FPGA的PWM波的产生，通过计数的方法实现-FPGA-based generation of PWM wave
pwm
- MSP430F149 用TIMER A 输出PWM波形-MSP430F149 output PWM waveform with the TIMER A
TMS320F2812-PWM-waveform-
- TMS320F2812 PWM波形调制 源码及其附件-TMS320F2812 PWM waveform modulation source and its annex
PWM-waveform
- 用Altera Quartus II 的VHDL语言完成的PWM波形产生的源代码-Altera Quartus II VHDL with the completion of the PWM waveform generation language source code
PWM-for-lpc210x
- lpc210x系列arm7 中pwm函数功能：MAT3.0输出PWM波形,由于LPC2103没有单独的PWM通道，跟匹配通道复用,调试：改变占空比。用示波器测量-lpc210x series arm7 in pwm Function: MAT3.0 output PWM waveform, the LPC2103 is no separate PWM channels, with the matching channel reuse, debug: changing the duty cycle
pwm
- 利用cortex m3 为核心输出双PWM波形控制直流电机，和红外发射头，红外用于检测电机转速。利用l6205驱动电机-The use of cortex m3 core dual PWM waveform output control DC motor, and the first infrared transmitter, infrared is used to detect the motor speed. Drive motor using l6205
atmega16-pwm
- atmega16输出带有死区时间可驱动mosfet的pwm波形-atmega16 output with dead time can drive the mosfet pwm waveform