搜索资源列表
beep
- 基于友善mini2440-linux-2.6.32 的嵌入式系统-beep驱动-Friendly mini2440-linux-2.6.32-based embedded system-beep, driven
beep-current.tar
- console beep command using pc speaker tty interface
console_beep-0.1.tar
- console beep 0.1 for linux desktop
beep
- 友善之臂mini2440的beep驱动一个简单的字符设备驱动-The friendly arm of a mini2440 the beep driver is a simple character device driver
piano
- 一个发声键盘驱动。本模块会首先禁用常规的键盘中断处理,然后将本身挂到IRQ1上,之后每次其收到键盘中断,将会读取键盘状态和按键,然后当 kernel 认为可行时运行 got_char 打印键盘事件并发出蜂鸣声。3.2.14版本linux下开发，测试可用。 -An audible keyboard driver. This module will first disable the regular keyboard interrupt handler, and then will hang i
beep
- 友善之臂mini2440开发板ARM-linux的beep底层驱动和测试程序-Friendly arm mini2440 development board ARM-linux beep underlying driver and testing procedures
beep
- 一个蜂鸣器的驱动以及它的应用程序代码。。基于S3C2440的-A buzzer driver, as well as its application code. . Based on S3C2440. . .
beep
- 基于linux rethad 开发gec2440（ARM9）的蜂(ning)宁器驱动，可以控制gec2440（ARM9）板卡上的蜂(ning)宁器。-Rather drive based the linux rethad development gec2440 (ARM9) Bee (ning) can control gec2440 (ARM9) Bee on the board (ning) Ning.
Sleep
- ** Descr iptions: 睡眠例程。 ** 跳线连接：分别将P2.7与蜂鸣器控制引脚BEEP、P2.8与LED1、P0.6与按键输入引脚KEY1短接； ** 操作方法：下载并运行程序； ** 现 象：程序开始运行蜂鸣器响一声后进入睡眠模式，当KEY1按下时，CPU被唤醒， ** LED1不断闪烁。-** Descr iptions: 睡眠例程。 ** 跳线连接：分别将P2.7与蜂鸣器控制引脚BEEP、P2.8与
beep_s
- Linux下温蜂鸣器beep的驱动程序文件,C语言-Temperature buzzer beep under Linux driver files, C language
beep
- 蜂鸣器驱动,测试用的，需要根据自己的板子自定义-beep driver
beep
- MINI2440开发板的蜂鸣器驱动程序通过调节PWM控制响声-MINI2440 development board driver buzzer sound by adjusting the PWM control
driver
- beep驱动，有助于初学者的驱动代码，可以参考-beep-driven help beginners driver code, can refer to
BEEP
- 基于KEIL UV4的ARM7环境下的beep蜂鸣器源码-Based beep buzzer source KEIL UV4 the ARM7 environment
beep.tar
- CW210开发板上的蜂鸣器控制,通过管脚复用来达到蜂鸣器的控制- Buzzer control CW210 development board through pin multiplexing to achieve buzzer control
beep
- 使用platform模型编写的蜂鸣器驱动，很适合初学者。-Using platform model to code buzzer driver, it is suitable for beginners.
buzzer
- Tiny6410开发板的蜂鸣器驱动程序，能够实现开发案上的蜂鸣器按照一定的频率鸣叫-The beep device drive program
ioctl_beep
- linux下beep驱动,用交叉编译器编译成开发板上能用的驱动-Linux beep driver, with a cross compiler compiled into the development board can be used to drive