搜索资源列表
LPC3250
- LPC3250 ARM9的核心板和开发板的原理图以及相关的一些PROTEL99SE的库文件。-the pdf form of LPC3250,and some important lib of protel 99 SE.
key
- lpc3250编写测试成功的linux2.6.28内核下的按键驱动源码，允许动态加载和卸载。-lpc3250 successful linux2.6.28 writing test buttons under the kernel driver source code, allowing dynamic loading and unloading.
beep
- lpc3250的蜂鸣器linux动态驱动模块源码，可以动态插入卸载驱动，方便调试~-lpc3250 buzzer dynamic drive module source linux, uninstall the driver can be dynamically inserted to facilitate debugging ~
led
- lpc3250编写测试成功的linux2.6.28内核下的led驱动源码，允许动态加载和卸载-lpc3250 successful linux2.6.28 writing tests led under the kernel driver source code, allowing dynamic loading and unloading
LPC3250_u-boot-1.3.3.tar
- NXP公司的ARM9 （LPC3250）下，绝对可用的uboot 源代码。网络、sdram、flash等一切正常。而且非常可靠。u-boot 的版本号是：1.3.3 .用ARM-linux-gcc 编译。-NXP' s ARM9 (LPC3250), the absolute uboot source code available. Network, sdram, flash and all is normal. And very reliable. u-boot version number
serial.tar
- simple serial program. Shows how to set parameters for RS232, and how to stabilish conection with a computer using minicom. Tested for ARM-linux plataform. Works fine with LPC3250 ARM processor.-simple serial program. Shows how to set parameters for
linux-2.6.27.8-lpc3250
- NXP 的ARM9 （LPC3250）硬件平台下 确实可用的Linux kernel 源代码的patch 文件。请在linux 用patch 命令对linux-2.6.27.8 进行升级后使用。NXP的同一系列的其他CPU应该也可以用。-NXP是ARM9 (LPC3250) hardware platforms does the Linux kernel source code available in the patch file. Please use the linux command o
sja1000
- lpc3250编写测试成功的linux2.6.28内核下的sja1000驱动源码，允许动态加载和卸载-lpc3250 successful linux2.6.28 write tests under the sja1000 kernel driver source code, allowing dynamic loading and unloading
lpc3250_uboot_i2c
- 支持lpc3250平台在u-boot上的i2c库函数，支持的i2c命令包括imd,imw等。经过测试的uboot版本为uboot-1.3.3，其他版本未测试。 -The source code supports uboot command for i2c on lpc3250 platform,such as imd.uboot-1.3.3 is tested!
ft5406_ts_lpc32xx
- 基于lpc3250平台的电容触摸屏芯片ft5406的嵌入式Linux驱动程序。 -Embedded Linux driver program for touch screen chip ft5406 on platform lpc32xx.