搜索资源列表
nand
- nand flash 驱动程序结构范例，基于s3c2410
cramfs用于nand上坏块补丁
- 问题说明：之前cramfs用于nand上时，由于没有标识nand坏块的功能，而当bootloader把cramfs镜像文件烧入nand后 （bootloader有标识坏块的功能），cramfs在运行解压时，就认不到坏块而报Error -3 while decompressing! 错误。 为了解决这个问题。就得在cramfs中添加标识坏块的功能。通过多天的艰苦搜寻，终于找到了。
NAND FLASH VHDL
- nand flash的VHDL编程设计
u-boot-1.1.6_OpenJTAG.rar
- 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot 添加的功能： 1. 同时支持S3C2410和S3C2440 2. 支持串口xmodem协议 3. 支持USB下载，可以在PC上使用dnw传数据 4. 支持网卡芯片CS8900 5. 支持NAND Flash读写 6. 支持从Nor/Nand Flash启动 7. 支持烧写yaffs文件系统映象,Support S3C24x0/yaffs/USB/CS8900/
u-boot-1.3.4.tar.gz
- UBOOT1.3.4支持三星6410多种启动方式，功能很强大.测试成功支持6410 nand启动,uboot1.3.4 suport all boot process of s3c6410
SJF24102440.rar
- 一个有漂亮界面的SJF2410/2440烧写nand/nor/str flash的工具软件 注意！：可以同时支持wiggler和SJF小板,A beautiful SJF2410/2440 programmer interface nand/nor/str flash tools software attention! : You can also support small board wiggler and SJF
nand-writer-03.20.00.06
- TI的OMAP138平台下Nand读写的源代码-Nand TI' s OMAP138 platform source code to read and write
sjf2410.rar
- sjf2410和sjf2440 还有giveio的驱动程序。 此程序是在windows环境下的flash烧写工具，可以烧写（nand和nor flash）。,In this package, there is sjf2410 sjf2440 and the driver of LTP-->giveio in windows. this is a flash-burning tool can be used in burning nor and nand flash.
J-Nand2410
- 使用JLINK烧写NAND FLASH的工具，经过多方面测试及其稳定，请大家放心使用-JLINK Shaoxie NAND FLASH using the tools, and numerous tests and their stability, and please rest assured that the use of
jlink
- jlink 下载u-boot 到nand flash 不需要验证flash的ID号，可用于K9F K9S 系列的-jlink used to download u-boot to nand flash without check flash ID if appended! used for k9f and k9s
u-boot-1.3.4-for-mini2440-2009-7-17
- 支持nand /nor flash 启动之uboot-1.3.4 专为mini2440开发 请先在windows XP下进行RAR解压,然后COPY至linux下编译,注意编译工具.(可以修改)-boot from nor/nand flash ,based mini2440 for samsung s s3c2440 CPU, CONTAIN dm9000 uboot-1.3.4
J-Nand2410_Source
- 之前我上传了JLINK烧写NAND FLASH的工具，现把其源代码也放上来，欢迎测试及修改-Before I uploaded JLINK Shaoxie NAND FLASH tool is its source code Fangshang Lai, welcome to test and modify the
yaffs__yaffs2.tar
- 仅适用于NAND FLASH的嵌入式文件系统yaffs以及升级版本yaffs2-applies only to the embedded NAND Flash File System and the upgrade version yaffs yaff s2
2410-yaffs.pdf.tar
- 基于 S3C2410 上的 Yaffs 文件系统制作。 Yaffs(Yet Another Flash File System)文件系统是专门针对 NAND 闪存设计的嵌入式文件系统-S3C2410-based file system on the production of Yaffs. Yaffs (Yet Another Flash File System) file system is designed specifically for NAND flash memory emb
at91_nand
- at91开发板（ARM920T)NAND flash linux驱动程序-AT91 Development Board (ARM920T) NAND flash linux drivers
hardware
- 《嵌入式Linux应用开发完全手册》一书中无操作系统下对GPIO、NAND Flash、LCD、I2C、Uart、MMU等调试程序-" Embedded Linux application development entirely manual," one book, no operating system on the GPIO, NAND Flash, LCD, I2C, Uart, MMU, etc. debugger
ELC2008_Filesystem_support_on_Multi_Level_Cell_fla
- open source support for MLC nand flash
nand
- Nand Flash的初始化、读取、写入、擦除、复位等操作。-Nand Flash initialization, read, write, erase, reset operation.
nand
- u-boot适合于arm9 ，2440 ；linux下，nand flash 驱动-u-boot for arm9, 2440 linux under, nand flash drive
Nand
- 基于arm9，s3c2440的nand flash 控制的资料-Based on arm9, s3c2440 the nand flash control information