搜索资源列表
u-boot-1.1.6_OpenJTAG.rar
- 支持S3C24x0/yaffs/USB/CS8900/DM9000/OpenJTAG/Nor,Nand启动的u-boot 添加的功能： 1. 同时支持S3C2410和S3C2440 2. 支持串口xmodem协议 3. 支持USB下载，可以在PC上使用dnw传数据 4. 支持网卡芯片CS8900 5. 支持NAND Flash读写 6. 支持从Nor/Nand Flash启动 7. 支持烧写yaffs文件系统映象,Support S3C24x0/yaffs/USB/CS8900/
SJF24102440.rar
- 一个有漂亮界面的SJF2410/2440烧写nand/nor/str flash的工具软件 注意！：可以同时支持wiggler和SJF小板,A beautiful SJF2410/2440 programmer interface nand/nor/str flash tools software attention! : You can also support small board wiggler and SJF
loadyaffs
- vivi烧写yaffs的文件！开发板公司没有提供！宝贵！-vivi programmer yaffs documents! Development board did not provide! Valuable!
a_jtag
- A版LPC2364、LPC2366、LPC2368和LPC2378 H－JTAG软件烧写方法.txt-A version of LPC2364, LPC2366, LPC2368 and LPC2378 H-JTAG programmer software methods. Txt
cygwin-1.2a
- tinyos2.0的驱动环境软件，可烧写程序。-driving environment tinyos2.0 software programmer procedures.
0504_test-iic
- ARM Linux2.4 IIC总线编程 非常好-ARM Linux2.4 IIC bus programmer very good
UBoot_Flash_ReadMe
- Spearhead2000的uboot烧写方法-Method of Spearhead2000 programmer uboot
Chapter_6_Advanced_experiments_part1
- 周立功magic2410实验箱源码 第6章Linux高级实验(part1) 6.1 Linux内核编译实验 6.2 Linux根文件系统实验 6.3 CAT1025读/写实验. 6.4 ZLG7290键盘读取 6.5 USB-E2PROM编程器实验 6.6 SD/MMC卡实验 6.7触摸屏实验 6.8 PCMCIA接口CF卡实验 -Magic2410 week experimental box Ligong source Linux High Chapte
android-programmer-guider.tar
- android app development-android app developmen reference
S3C2410_BIOS
- 优龙开发板FS2410启动BIOS，主要功能有文件下载、FLASH烧写、启动存储在FLASH中的程序、设置启动参数、设置Wince或Linux的自启动。-Development board FS2410 EURONAVY start the BIOS, the main functions file downloads, FLASH programmer, start the program stored in FLASH, set the startup parameters set Winc
jzqsjf2440
- HHARM EDU 实验指导书 嵌入式LINUX开发入门 JTAG烧写-HHARM EDU experimental guide book Introduction to JTAG programmer developing embedded LINUX
fx2_programmer
- cypress fx2 programmer
J-link_init
- 使用J-link烧写nandflash的初始化文件，自己使用过，非常好用！-Initialization file to use J-link programmer nandflash own use, very easy to use!
embedded-Linux-development
- 嵌入式linux的基本概念介绍，烧写引导系统，系统裁剪和移植及软件开发过程-Introduces the basic concepts of embedded linux programmer to boot the system, the system cutting and transplantation and software development process
u-boot-1.1.6_OpenJTAG_nand_large
- 是修改后的uboot，支持大页nand，usb烧写程序-Uboot, modified to support large page nand usb programmer procedures
zImage_2.6.25.8_Q43_20100601
- 嵌入式linux烧写镜像文件,适合天嵌tq6410开发板-Embedded linux programmer mirror to file suitable day to embedded tq6410 development board
Kernal20130328
- TQ2440板子的内核文件，TQ2440是一款基于arm9的板子，这个内核文件是2.6.30的，可直接使用-TQ2440 board kernel file, you can directly programmer, has compiled a well of
www.dssz.com_JFlash_MM
- intel pxa272 cpu烧写工具jtag-intel pxa272 cpu JTAG programmer tools-intel pxa272 cpu programming tools jtag-intel pxa272 cpu JTAG programmer tools
X98_Air_3G_Dual
- x98 air 3g c9j7 编程器备份(x98 air 3g c9j7 programmer backup)