搜索资源列表
progtstdyfthfge
- 单片机和PC机串口通讯实例说明 首先打开串口调试程序并按要求设置。启动51板后,按S10切换至接收状态,按S12切换至发送状态,启动默认为发送状态。 发送状态: 进入发送状态后,可向PC发送1-9 9个数字,并且数码显示同时显示发送的数,按S1发送1,按S2发送2,依次到按S9发送9。S11无用。发送成功可在串口调试程序的数据接收栏中显示收到的数据。 发送状态: 进入发送状态后,在串口调试程序的数据发送栏中输入00-FF的16进制2位数,点击手动
PC
- 这是一个AT89C51单片机实验开发板向PC机的串口单向发送数据AF的演示程序
232.rar
- PC与单片机通讯,汇编程序, 这是一个AT89C51单片机实验开发板向PC机的串口单向发送数据AF的演示程序,PC with Single-chip communication, the compilation process, which is a single-chip microcomputer AT89C51 experimental development board to PC serial machine to send data one-way AF demo program
IntJour28
- ISP处理,主要关注三大关键技术,自动曝光AE,自动白平衡AWB,自动聚焦AF-ISP process,include three key points: AE AWB AF
KEYled
- 4*4键盘扫描并且在数码管上显示0-9、10个数字,A-F、6个字母对应键盘S1-S16-4* 4 keyboard scanning and digital tube display 0-9,10 figure, AF, 6 letters correspond to the keyboard S1-S16
af
- MATLAB环境下PC机与16位单片机串行通信实现-matlab
Keyboard
- 1、开始运行时 指示灯7亮,等待键盘按键 2、按下"F"键进入运行状态,指示灯7闪烁 * 3、在指示灯7闪烁状态,按“0-9”之一键,指示灯3-0 * 显示对应值(以二进制表示,1亮,0暗,例如:110(十进制3) 则指示灯2、1亮,指示灯0灭),按“A-F”之一键,指示灯3-0灭。-1, starts running when the indicator light 7 light, waiting for the keyboard button 2, press the
jianpan
- 这是一个4X4的矩阵式键盘模拟,8位7段数码管显示,能实现0-9,A-F的键盘输入-This is a 4X4 matrix keyboard simulation, eight 7-segment digital display, to achieve 0-9, AF keyboard input
af
- 用光电码盘实现的测量小车的速度,原理是是在小车上装码盘,利用红外线的遮挡产生脉冲。-Achieved with optical encoder measuring the speed of the car, the principle is tops in the car yard drive, block the use of infrared pulse.
yaokong
- 使用红外遥控数码管显示键值,共可显示21个值:数字0-9;字母A-F -、H、L、P、U。稍作修改即可用遥控器实现其他功能(如控制继电器的通断等)-Digital display with infrared remote control key, show a total of 21 values: numbers 0-9 the letters AF -, H, L, P, U. Minor modifications to other functions with the remote c
datasheet
- VB6871 3-Mpixel AF MDDI camera module
Smpl_DrvACMP
- 关于芯唐M0核 ADC源码 ADC 带进位的加法指令 ADC Reg/Mem, Reg/Mem/Imm 功能,将目的操作数和源操作数相加再加低位进位,结果送入目的的地址 dst+src+cf->dst, 受影响的标志位:AF、CF、OF、PF、SF和ZF,该指令的功能是把源操作数和进位标志位CF的值(0/1)一起加到目的操作数中。-About Nuvoton M0 nuclear ADC source Add instruction ADC into the ADC of Reg/
STm32-RCC
- STM32学习笔记——RCC系统时钟配置-The microcontroller clock output clock to output to an external MCO pin, related to the GPIO pin must be configured to the standby function model is AF model
PCAP02AE_Datasheet_EN_v1
- 德国ACAM公司推出了PICOCAP系列第二代MEMS电容传感器信号处理专用芯片Pcap02。Pcap02具有业界最高的电容测量兼容性,其输入范围覆盖0 fF至数百nF,可用于单端或差分电容测量,亦可用于接地或悬空电容测量。-Low-power capacitance-to-digital converter with wide input range ( fF to nF) and versatile configuration options. PCap02 can be config
简易电子秤(最终(1.10
- 精度0.01g,使用STM32进行编程,结合应变片设计的硬件(lsdsan safnj ajasfnjk af aff f asfasf asfaf afas)