搜索资源列表
armsource
- 基于arm生物识别项目的开发源码 请勿用于商业应用，代码稍作改动就可以应用，仅限于参考-biometrics-based arm of open source projects do not for commercial applications, minor modifications on the code can be applied, reference is limited to
UCOS-II1
- 基于S3C44B0X的ucosII项目工程源码-ucosII projects FOSS
proteus-ARM2100-uCOS2.70
- 没有ARM开发板如何搞开发,有了PROTEUS就可以搞定!快来学习PROTEUS哦! 此为proteus-ARM2100-USOS2.70仿真文件及原码,赶快下载学习哦!收益非浅啊!-not how ARM Development Board engaged in development projects With PROTEUS can get! Come learn PROTEUS Oh! this as proteus-AR M2100 - USOS2.70 simulation fi
Ucos-Ii-v261-Microblaze-Nohauupdated-fixed05-2006.
- uC/OS-II Notes from Nohau Corporation The code associated with this readme.txt file is provided \"as is\". The code was written with the intention of creating a functional RTOS demo for the Nohau evaluation boards that can run a MicroBlaze
ucos 51 lcd原代码
- uC/OS-II在C51下的一个完整的LCD项目源码，ucos 2.0 在C51下应用的一个完整工程，用到了SED1330(LCD320x240)， 小汉字库自动提取，字库文件自动生成。-uC / OS-II in the C51 a complete LCD-source projects, CENTER 2.0 C51 under the application of a complete project, uses SED1330 (LCD320x240), small Store aut
ARM7_ATSAM64_UCOS_KEIL.rar
- ATMEL ARM7 SAM64 Porting ucos / Keil ARM VER3.04。不同于其它，本代码使用了独立的中断栈，能显著降低RAM的需求，尤其适合小RAM的CPU使用。工程中已经建立了ULINK、以及H-JTAG调试的FALSH&RAM版本，因为涉及版权，不包含ucos source。,ATMEL ARM7 SAM64 Porting ucos/Keil ARM VER3.04. Different from the other, the code uses a separ
ucos_GPRS_source
- 基于UCOS的GPRS的源码工程，是开发无线远程嵌入式控制系统很好的参考资料。-The GPRS-based UCOS source projects, is to develop embedded wireless remote control system a good reference.
Cortex-M3_uCOSII_lpc1700
- 周立功提供的cortex-m3内核的工程模板，ucos已经移植好了，可以直接在上面建立自己的工程-ZLG cortex-m3 kernel project templates, ucos been ported directly to establish their own projects in the above
ucos_keil_Led
- EasyARM1138开发板上成功移植的uCOS_II工程,开发环境为KEIL,工程已测试通过! -EasyARM1138 Development Board successfully transplant uCOS_II engineering, development environment for KEIL, projects have been tested!
MCF51JM128_FREERTOS
- This a ported version for FreeRTOS using the microcontroller MCF51JM128 of Freescale, this is a very easy example to start to use this RTOS
ucos2-template-for-keil
- 自己做的ucos2在keil下的工程模板，平台为lpc2000,经过大量的实验，很稳定-The ucos2 make their own projects under the keil template platform for lpc2000, after a large number of experiments, is very stable
TinyARM23_OTG
- TinyArm T23系列工程模板代码，内容详细，可以作为嵌入式工控机开发的，操作系统为ucos-TinyArm T23 series of projects the template code, detailed and can be developed as an embedded industrial computer, the operating system ucosII
RFIDPGPRS-based-uCOS-II-
- 本实例针对Cortex-M3处理器开发平台和无线通信模块，将uC/OS-II移植在STM32F10x处理器上，并实现了RFID_GPRS等基于物联网技术的综合项目应用-This example for the Cortex-M3 processor development platform and wireless communications module, uC/OS-II transplantation STM32F10x processor and implements the RFID
UCOSII
- 内有ucos 移植源码，亲自测可用版本，有项目实践过-There ucos transplant source, personally test version available, there are projects practiced
uCOS_xilinx-FPGA
- uCOS在xilinx FPGA上的移植代码和BSP编写工程，配合ise12.3使用。-uCOS transplant in xilinx FPGA code and BSP on writing projects, with ise12.3 use.
2410naozhongbaojing
- 移植ucos到2410的工程例子 移植ucos到2410的工程例子,用于实现任务建立、打开定时器、系统初始化等，运行后删除；-Ucos to 2410 migration project examples to transplant ucos ucos 2410 to 2410 migration project examples examples of projects
ucos-task-project
- 基于S3C2410开发箱的,在ucosii上跑的task实验工程，压缩包内是一个完整的项目工程 -Based on S3C2410 development box, run on the task at ucosii experimental projects, the compressed package contains a complete Project
ARM1439
- 该源代码为一个移值好的UCOS2操作系统，移值在LM3S处理器芯片上，可实现对标准模拟信号的采集，显示，设定该值 ，直接驱动320液晶屏，用于医疗设备及小型数控设备稍加修改就可用于其它项目。-The source code for a shift value of good UCOS2 operating system, shifting values LM3S processor chip, enabling the standard analog signal a
threemicrocontrollerprojects
- Contains three microcontroller projects which can be implemented using embedded c.
ARM7-Uart0
- ARM7 串口应用开发的工程和例子，包含C源码。-ARM7 serial application development projects and examples, contains the C source code.